Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Ür. no. 006

The inexpensive three-layer sheet for all standard applications

The Formwork sheet 3S basic is a three-ply solid-wood sheet with urea-melamine resin coating on both sides for many different uses on construction sites, which is suitable for repeated use. Less reworking costs are incurred due to high dimensional and angular accuracy.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Ür. no. 008

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Ür. no. 019

Plywood sheet made of European poplar with 120 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Ür. no. 023

Self-cleaning threadbar

Ür. no. 030

Closure between the panels.

Ür. no. 044

Closure between the panels for formwork-sheet thickness 21 mm.

Ür. no. 045

Closure between the panels.

Ür. no. 062

Ür. no. 580914000

Pressure sprayer for Doka release agents.

Ür. no. 581424000

Connector with captive support plate used with tie rods.

Ür. no. 581450000

Expendable form-tie component for single-sided tying.

Ür. no. 581890000

Expendable form-tie component for single-sided tying.

Ür. no. 581896000

Expendable form-tie component for single-sided tying.

Ür. no. 581966000

Connector with captive support plate used with tie rods.

Ür. no. 581460000

Lost form-tie distance tube for retrievable form ties.

Ür. no. 581461000

Prevents concrete from penetrating inside the jacket tube.

Ür. no. 581865000

Making positioning points at an angle of 45 °.

Ür. no. 581866000

Making positioning points at an angle of 45 °.

Ür. no. 581867000

Making positioning points at an angle of 45 °.

Ür. no. 581897000

Securing the bridge edge beam support to the formwork.