Doka beam I tec 20

The Composite formwork beam I tec 20 is a solid-web beam pursuant to DIBT (German Institute of Building Technology) building-industry approval with a special structure and innovative polyurethane end reinforcement for low material quantities and extended service life.

Art.-No. 001

Eurex 100 plus

Floor prop for heavy slab loads.

Aufgrund erhöhter Nachfrage kann es zu derzeit zu verlängerten Lieferzeiten kommen.

Art.-No. 028

Tie rod 20.0mm galvanised

Self-cleaning threadbar

Art.-No. 032

Framax Xlife universal panel

Forming right-angled outside corners, stop-ends and column formwork.

Art.-No. 037

Framax Xlife plus form tie 20.0

Tapered form tie, operated from one side only, for Framed formwork Framax Xlife plus.

Art.-No. 046

DokaPly natural 20mm 250/125cm

Art.-No. 185061000

DokaPly natural is an uncoated plywood sheet for subordinate purposes and for cuttings.

One package contains 45 pieces.

Anchor plate

Bearing plate for connectors.

Art.-No. 201

Panel strut

Basic strut for connecting to different formwork systems with heights up to approx. 4 m.

Art.-No. 239

Framax universal fixing bolt

Panel connection in the outside corner and with column formwork and for attaching universal walings, for example, and other parts to the formwork.

Art.-No. 261

Panel strut 540 IB

Art.-No. 580366000

Basic strut for connecting to different formwork systems with heights up to approx. 4 m.

Standard 3.00m hanging no spigot

Art.-No. 301793000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Safeflex sliding mesh

Simple measure - great effect.

 

The Safeflex sliding grid is the innovative addition for greater safety when shuttering with girder slab formwork in in-situ concrete construction. It impresses with its simple handling, little additional effort and significantly increased safety when laying the formwork panels.

 

Tested in accordance with DGUV Test GS-Bau-18

 

 

Art.-No. 642

UNIplex F/F brown 120 21mm 125/250cm FSC

Art.-No. 185241500

Plywood sheet made of Chinese poplar veneer with composed deck Veneers. Both sides are coated with 120 g/m² brown phenolic-resin film. Bonding is exterior and will pass a 24 h boiling test.

One package contains 45 pieces.

Hexagon nut 20.0

Art.-No. 581420000

Connector in use with anchor plates and tie rods.

Super plate 20.0 B

Art.-No. 581424000

Connector with captive support plate used with tie rods.

Beam forming support 20

Art.-No. 586148000

Supporting side formwork of drop beams and slab stop-ends.

4-way head H20

Art.-No. 586170000

Floor-prop head for supporting and stabilising Doka formwork beams.

Supporting head H20 DF

Art.-No. 586179000

Securing intermediate props to prevent toppling.

Framax Xlife universal panel 0.90x0.90m

Art.-No. 588120500

Forming right-angled outside corners, stop-ends and column formwork.

Framax Xlife universal panel 1.20x3.30m

Art.-No. 588671500

Forming right-angled outside corners, stop-ends and column formwork.