Der widerstandsfähige Schalungsträger in Vollwandkonstruktion

Hochwertig, robust, langlebig – Der Doka-Träger H20 top N ist ein widerstandsfähiger Vollwandträger mit einem Steg aus Dreischichtplatte, der in Wand- und Deckenschalungssystemen eingesetzt werden kann. Die innovative Endverstärkung aus Polyurethan reduziert Beschädigungen und garantiert eine bis zu dreifach längere Lebensdauer.

Bitte beachten Sie, das es aufgrund von erhöhter Nachfrage zu Lieferengpässen kommen kann und sich dadurch die Lieferzeiten verlängern können.

N.º art. 002

The durable formwork beam with a solid-web design

High-quality, robust, long-lasting – The Doka H20 top P beam is a durable formwork beam in solid-web design with a web made of special flat-pressed sheet that can be used in wall and slab formwork systems. The innovative polyurethane beam-end caps reduce damage and guarantee a service life that is up to three times longer.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

N.º art. 003

Timber formwork beam H20 eco N is a solid-web beam in accordance with EN 13377 with proven end reinforcement in the form of bevelled beam ends and extra plastic rivet in the beam flange.

N.º art. 004

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

N.º art. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

N.º art. 006

N.º art. 008

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

N.º art. 019

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

N.º art. 022

EN 1065-compliant telescopic construction prop, made of steel.

N.º art. 024

L'étai de dalle extra-longue avec protection antihoc les chocs intégrée

L'étai de dalle robuste et durable Eurex 30 top convainc par une force portante minimale élevée de 30 kN et correspond aux classe d'étais C/E selon la norme EN 1065. Le protection antihoc les chocs intégrée protège de manière fiable le tube de l'étai contre les dommages mécaniques et augmente de manière significative la durée de vie de l'étai en tube d'acier.

N.º art. 025

Doka-Deckenstützen Eurex eco sind wirtschaftliche Baustützen aus Stahl mit Ausziehvorrichtung, entsprechend EN 1065. Sie dienen als vertikale Stützen für temporäre Konstruktionen und zeichnen sich durch die konstant hohe Tragkraft von 20 kN bei jeder Auszuglänge aus.

N.º art. 026

The lightweight aluminium floor prop with high load capacity

The floor prop Eurex 100 plus is a high-strength construction prop made of aluminium with a load capacity up to 128 kN, type-tested and approved in accordance to with approval Z-8.312-868. The floor prop also impresses with its easy handling thanks to quick-motion adjustment screw jack.

N.º art. 028

Self-cleaning threadbar

N.º art. 029

Self-cleaning threadbar

N.º art. 030

Self-cleaning threadbar

N.º art. 032

Self-cleaning threadbar

N.º art. 033

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

N.º art. 035

Framed panel with Xlife sheet for crane-assisted forming of large areas.

N.º art. 036

Forming right-angled outside corners, stop-ends and column formwork.

N.º art. 037

Forming right-angled inside corners.

N.º art. 038