Der Holzschalungsträger H20 top ist ein Vollwandträger gemäß EN 13377 mit innovativer Endverstärkung aus Polyurethan für erhöhte Widerstandsfähigkeit gegen mechanische Beanspruchungen.

Art.-No. 003

Der Holzschalungsträger H20 eco P ist ein Vollwandträger gemäß EN 13377 mit bewährter Endverstärkung durch Abschrägung der Trägerenden und zusätzlichem Kunststoffniet im Trägergurt.

Art.-No. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 007

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 008

High-grade plywood sheet made of Nordic birch with 120 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-No. 015

High-grade plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-No. 016

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Art.-No. 019

Telescopic steel prop.

Art.-No. 027

Self-cleaning threadbar

Art.-No. 029

Expendable form-tie distance tube for retrievable form ties at waterproof form-tie points.

Art.-No. 031

Bracing gangforms, infills and corners and forming stop-ends.

Art.-No. 041

Bracing gangforms, infills and corners and forming stop-ends.

Art.-No. 075

Post for safety barriers on the formwork or on the structure.

Art.-No. 089

Art.-No. 583012000

Storage and transport device for small items

Art.-No. 580914000

Pressure sprayer for Doka release agents.

Art.-No. 581120000

Lost form-tie component for single-sided formwork tying.

Package size: 70 pcs.

Art.-No. 583011000

Storage and transport device for small items

Art.-No. 581692000

Securing cantilever positioning cones when it is not possible to drill through the formwork sheeting.

Art.-No. 583016000

Storage and transport device.