The extra long-lived floor prop with impact protector

The robust and long-lived Eurex 20 top floor prop impresses with a high minimum load capacity of 20 kN and complies with prop classes D, B/D or C/D in accordance with standard EN 1065. The integrated impact protector reliably protects the outer tube from mechanical damage and significantly increases the life span of the tubular steel prop.

Art.-No. 024

The floor prop with high load capacity and safe handling

The tested quality prop Eurex 20 eco from Doka is characterised by a high minimum load capacity of 20 kN and corresponds to prop class B/D in accordance with standard EN 1065. The steel props also impress with their simple and safe handling and their impressive price-performance ratio.

Art.-No. 026

Art.-No. 586155500

For securing floor props

Art.-No. 586294000

Set-up aid for floor props.

Art.-No. 586174000

Floor-prop head for supporting and stabilising Doka formwork beams, with integral quick-lowering feature.

Art.-No. 586170000

Floor-prop head for supporting and stabilising Doka formwork beams.

Art.-No. 586179000

Securing intermediate props to prevent toppling.

Art.-No. 586239000

Making a slab stop-end.

Art.-No. 586257000

Installation of the Doka floor end-shutter clamp.

Art.-No. 586258000

Installation of the Doka floor end-shutter clamp.

Art.-No. 586182000

Aid for working with Doka formwork beams in the floor formwork system during forming up and stripping out operations.

The stress-resistant formwork beam in solid-web design

High-quality, robust, long-lasting – The Doka H20 top N beam is a durable formwork beam in solid-web design with with a three-ply sheet web that can be used in wall and slab formwork systems. The innovative polyurethane beam-end caps reduce damage and guarantee a service life that is up to three times longer.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 002

The durable formwork beam with a solid-web design

High-quality, robust, long-lasting – The Doka H20 top P beam is a durable formwork beam in solid-web design with a web made of special flat-pressed sheet that can be used in wall and slab formwork systems. The innovative polyurethane beam-end caps reduce damage and guarantee a service life that is up to three times longer.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 003

Timber formwork beam H20 eco N is a solid-web beam in accordance with EN 13377 with proven end reinforcement in the form of bevelled beam ends and extra plastic rivet in the beam flange.

Please note that delivery bottlenecks may occur due to increased demand and delivery times may be extended as a result.

Art.-No. 004

The tried-and-tested formwork beam in solid-web design

High-quality, hard-wearing, durable – The Doka beam H20 eco P is a dimensionally stable solid wall beam with a web made of special flat-pressed sheet and proven end-reinforcement by bevelling the beam ends and an extra plastic rivet in the beam chord. The beam can be used in wall and slab formwork systems.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 005

Art.-No. 580470000

Erecting safety railings at exposed outer edges.

Art.-No. 584384000

Fall protection on the structure.

Art.-No. 584385000

Pushed into the fresh concrete, push-in socket for the Handrail post 1.10m.

One package contains 100 pieces.

Art.-No. 584386000

Pushed into the fresh concrete, screw-in socket for the Handrail post 1.10m.

One package contains 100 pieces.

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 008