EN 1065-compliant telescopic construction prop, made of steel.

Art.-No. 025

EN 1065-compliant telescopic construction prop, made of steel.

Art.-No. 024

EN 1065-compliant telescopic construction prop, made of steel.

Art.-No. 026

Art.-No. 586294000

Set-up aid for floor props.

Art.-No. 586155500

For securing floor props

Art.-No. 586145000

For securing floor props

Art.-No. 586174000

Floor-prop head for supporting and stabilising Doka formwork beams, with integral quick-lowering feature.

Art.-No. 586170000

Floor-prop head for supporting and stabilising Doka formwork beams.

Art.-No. 582528000

Connection resistant to tensile and compressive forces to secure profiles telescoped into each other.

Art.-No. 586179000

Securing intermediate props to prevent toppling.

Art.-No. 586149000

In combination with Beam forming support 20, adapting to the height of drop beams and slab stop-ends.

Art.-No. 586148000

Supporting side formwork of drop beams and slab stop-ends.

Art.-No. 586257000

Installation of the Doka floor end-shutter clamp.

Art.-No. 586555000

Mobile working platform with ladder for working at high points.

Art.-No. 582768000

Makes nuts easier to loosen. At screw jack foot and Doka floor props, among others.

Art.-No. 586182000

Aid for working with Doka formwork beams in the floor formwork system during forming up and stripping out operations.

Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.-No. 003

Dimensionally stable solid-web beam with three-ply web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.-No. 002

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Note: For fast shipping, currently only available in the sizes 200/50cm 250/50cm and 100/50cm

Art.-No. 007

Art.-No. 580470000

Erecting safety railings at exposed outer edges.