Steel tube with wall thickness of 3.2 mm.

Réf. 042

Réf. 682004000

For connecting two Scaffold tubes 48.3mm at an angle of 90°.

Réf. 834023010

Slab attachments are used with anchor bolts to secure a complete safety net fan unit to the top of the slab.

Réf. 834023020

Wall attachments are used with anchor bolts to secure a complete safety net fan unit to the face of a wall.

Réf. 834024010

Couplers, adjustable are used as adjustable connections between the horizontal tube of the Safety net fan and the bodies and slab attachments.

Réf. 834024040

Wind locks are used to ensure that high winds cannot cause the Safety net fan to fold in toward the building. One Wind lock has to be installed on each diagonal tube.

Réf. 834025010

The diagonal tubes are diagonal members between the bodies and the outer horizontal tube of the Safety net fan.

Réf. 834025020

Extension tubes for extending the diagonal tubes when an extra-wide Safety net fan is used.

Réf. 834025050

Corner unit kits turn a standard safety net fan unit into a corner unit by adding additional bracing for the cantilevered areas.

Réf. 834025060

The Lifting sling can be used to lift complete safety net fan units from the ground for initial installation and for repositioning the units as the project progresses.

Réf. 834025070

Concrete anchor bolt for all kinds of fixings to existing structures.

Réf. 834025080

Tool for assembling complete safety net fan units.

Réf. 584784000

Sling for attaching a safety net unit to the crane.

Réf. 584786000

Mounting tool for assembling a safety net unit.

Safety net fan consisting of two aluminum tubes and netting; combines with bodies and diagonal tubes to form a complete safety net fan unit.

Réf. 205

Bodies are vertical supports for diagonal members against the existing structure.

Réf. 295

Extension legs are adjustable parts used with the bodies for an exact height match on existing slabs.

Réf. 346

Double couplers 48/60mm are used to connect the outer horizontal tube of the Safety net fan to the diagonal tubes.

Réf. 525

For right-angle connection of two round-section tubes, one with 48.3 mm and one with 60.3 mm diameter.

Réf. 526