Timber formwork beam H20 top is a solid-web beam in accordance with EN 13377 with innovative polyurethane end reinforcement for increased resistance to mechanical stresses and strains.

Réf. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Réf. 004

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Réf. 019

Réf. 583012000

Storage and transport device for small items

Réf. 583011000

Storage and transport device for small items

Réf. 581823000

Self-cleaning threadbar

Réf. 581874000

Self-cleaning threadbar

Réf. 586151000

Storage and transport device.

Réf. 581966000

Connector with captive support plate used with tie rods.

Réf. 586170000

Floor-prop head for supporting and stabilising Doka formwork beams.

Réf. 586174000

Floor-prop head for supporting and stabilising Doka formwork beams, with integral quick-lowering feature.

Réf. 588153400

Connector for high-tensile connections between framed panels.

Réf. 588168000

Infill connection to resist tensile forces.

Réf. 586155500

For securing floor props

Réf. 586294000

Set-up aid for floor props.

Plywood sheet made of Chinese eucalyptus with 240 g/m² phenolic-resin film coating on both sides. The phenolic resin bond of the sheet passes a 72-hour boiling test. The edges are sealed with acrylic-resin varnish.

Réf. 533

Dimensionally stable solid-web beam with three-ply web and PUR beam-end reinforcement. (EN 13377-compliant)

Réf. 611