EN 1065-compliant telescopic construction prop, made of steel.

Art.-No. 024

Doka floor props Eurex top are extendable floor props made of steel and are compliant with EN 1065.
They are designed for use as vertical props for temporary structures.

Art.-No. 025

The floor prop with high load capacity and safe handling

The tested quality prop Eurex 20 eco from Doka is characterised by a high minimum load capacity of 20 kN and corresponds to prop class B/D in accordance with standard EN 1065. The steel props also impress with their simple and safe handling and their impressive price-performance ratio.

Art.-No. 026

Art.-No. 586155500

For securing floor props

Art.-No. 586145000

For securing floor props

Art.-No. 586174000

Floor-prop head for supporting and stabilising Doka formwork beams, with integral quick-lowering feature.

Art.-No. 586179000

Securing intermediate props to prevent toppling.

Art.-No. 586170000

Floor-prop head for supporting and stabilising Doka formwork beams.

Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.-No. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Art.-No. 004

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Art.-No. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 007

Art.-No. 582528000

Connection resistant to tensile and compressive forces to secure profiles telescoped into each other.

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 006

Art.-No. 008

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Art.-No. 022

Art.-No. 584385000

Pushed into the fresh concrete, push-in socket for the Handrail post 1.10m.

Art.-No. 584386000

Pushed into the fresh concrete, screw-in socket for the Handrail post 1.10m.

Art.-No. 586148000

Supporting side formwork of drop beams and slab stop-ends.

Art.-No. 586149000

In combination with Beam forming support 20, adapting to the height of drop beams and slab stop-ends.