Self-cleaning threadbar

Art.-No. 030

Art.-No. 581914000

Lost form-tie component for making waterproof form-tie points.

Art.-No. 581984000

Expendable form-tie component for single-sided tying.

Art.-No. 581853000

Connecting the plastic tubes to the waterstop.

One package contains 250 pieces.

Art.-No. 588251500

Bottom bracing of the Panel strut 540 IB.

Art.-No. 581980000

Suspending Climbing brackets 150A, 150F and 200F.

Art.-No. 586294000

Set-up aid for floor props.

Expendable form-tie component for single-sided tying.

Art.-No. 116

Expendable form-tie component for single-sided tying.

Art.-No. 117

Turning and holding tie rods.

Art.-No. 202

Weld-on socket for force-transmitting connection between tie rods.

Art.-No. 204

Storage and transport device for Dokadek panels.

Art.-No. 223

Basic strut for connecting to different formwork systems with heights up to approx. 4 m.

Art.-No. 239

Art.-No. 185188000

Plywood sheet made of Chinese eucalyptus with 240 g/m² phenolic-resin film coating on both sides. The phenolic resin bond of the sheet passes a 72-hour boiling test. The edges are sealed with acrylic-resin varnish.

Measuring cable with three measuring points. The cable connects to the Concremote cable sensor and is cast into the concrete as a lost part.

Art.-No. 480

Plywood sheet made of unsanded chinese poplar veneers. Both sides are coated with 160 g/m² Black phenolic-resin film. Bonding will pass a 24 h boiling test.

Art.-No. 485

Prevents adhesion between concrete and cone with insulation up to 11 cm thick.

Art.-No. 486

Plywood sheet made of Chinese eucalyptus veneers with 130 g/m² phenolic-resin film coating on both sides. The melamine-resin glue-bonding of the panel passes the 24 h boiling test to the Chinese standard. The edges are sealed with acrylic-resin varnish.

Art.-No. 531

Art.-No. 734009101

Art.-No. 734009102