Timber formwork beam H20 top is a solid-web beam in accordance with EN 13377 with innovative polyurethane end reinforcement for increased resistance to mechanical stresses and strains.

Cod. art. 003

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Cod. art. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Cod. art. 008

EN 1065-compliant telescopic construction prop, made of steel.

Cod. art. 024

EN 1065-compliant telescopic construction prop, made of steel.

Cod. art. 026

Self-cleaning threadbar

Cod. art. 029

Self-cleaning threadbar

Cod. art. 030

Steel tube with wall thickness of 3.2 mm.

Cod. art. 042

Grating for safety barriers on the formwork or on the structure.

Cod. art. 043

Bracing gangforms, infills and corners and forming stop-ends.

Cod. art. 075

Post for safety barriers on the formwork or on the structure.

Cod. art. 089

Cod. art. 580470000

Erecting safety railings at exposed outer edges.

Cod. art. 581448000

Tightening and loosening cone screws.

Cod. art. 581961000

Connector in use with anchor plates and tie rods.

Cod. art. 581964000

Connector in use with anchor plates and tie rods.

Cod. art. 581966000

Connector with captive support plate used with tie rods.

Cod. art. 586148000

Supporting side formwork of drop beams and slab stop-ends.

Cod. art. 586149000

In combination with Beam forming support 20, adapting to the height of drop beams and slab stop-ends.

Cod. art. 586170000

Floor-prop head for supporting and stabilising Doka formwork beams.

Cod. art. 586179000

Securing intermediate props to prevent toppling.