The high elasticity of the steel used allows the creation of long fins at an angle of 90 degrees, which helps to effectively fix the panel without damaging its edges, this facilitating an efficient assembly of the formwork system.

• Available sizes: 20cm, 25cm, 30cm, 35cm
• The first spacer should not be more than 5 cm from the edge of the panel.
• Carefully check the correct connection between spacers and wedges, in no case will the hammer be used for joining.
• Respect the installation distance between spacers depending on the project and the casting height.
• Casting is done slowly, without sudden discharges, especially at the base of the formwork.
• The filling speed must not exceed 2.5 m/h per height