The durable formwork beam with a solid-web design

High-quality, robust, long-lasting – The Doka H20 top P beam is a durable formwork beam in solid-web design with a web made of special flat-pressed sheet that can be used in wall and slab formwork systems. The innovative polyurethane beam-end caps reduce damage and guarantee a service life that is up to three times longer.

Art.nr. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Art.nr. 004

The tried-and-tested formwork beam in solid-web design

High-quality, hard-wearing, durable – The Doka beam H20 eco P is a dimensionally stable solid wall beam with a web made of special flat-pressed sheet and proven end-reinforcement by bevelling the beam ends and an extra plastic rivet in the beam chord. The beam can be used in wall and slab formwork systems.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.nr. 005

The high-performance quality sheet for special requirements and many uses

The Doka formwork sheet 3-SO is a high-grade three-ply solid-wood sheet with urea-melamine resin coating on both sides for horizontal and vertical formwork applications. It offers first-class concrete results due to selected wood quality and excellent surface finishing.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.nr. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.nr. 008

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Art.nr. 019

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Art.nr. 022

EN 1065-compliant telescopic construction prop, made of steel.

Art.nr. 024

The extra long-lived floor prop with impact protector

The robust and long-lived Eurex 30 top floor prop impresses with a high minimum load capacity of 30 kN and complies with prop classes C/E in accordance with standard EN 1065. The integrated impact protector reliably protects the outer tube from mechanical damage and significantly increases the life span of the tubular steel prop.

Art.nr. 025

EN 1065-compliant telescopic construction prop, made of steel.

Art.nr. 026

L'étai de dalle léger en aluminium avec force pontante élevée

L'étai Eurex 100 plus est un étai en aluminium très résistant avec une capacité de charge allant jusqu'à 128 kN. Il a été testé et approuvé selon l'agrément technique Z-8.312-868. De plus, l'étai de dalle convainc par son manipulation simple grâce au réglage rapide par vérins.

Art.nr. 028

Self-cleaning threadbar

Art.nr. 029

Self-cleaning threadbar

Art.nr. 030

Self-cleaning threadbar

Art.nr. 032

Self-cleaning threadbar

Art.nr. 033

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Art.nr. 035

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Art.nr. 036

Forming right-angled outside corners, stop-ends and column formwork.

Art.nr. 037

Forming right-angled inside corners.

Art.nr. 038

Forming right-angled inside corners.

Art.nr. 039