Extension of the Xsafe plus platform waling 1.50m with vertically stacked Framax panels set longside horizontal.

Art.-No. 073

Art.-No. 580441000

Bracket for making a folding platform.

Art.-No. 580485000

Closure between 2 folding platforms and corner solution.

Art.-No. 580413000

Pre-assembled scaffold platform for use as working or protection platform at an inside corner.

Art.-No. 580424000

Pre-assembled scaffold platform for use as working or protection platform at an outside corner.

Art.-No. 586415000

For bracing vertically stacked Framax panels set longside vertical and for securing the Xsafe plus platform at the inter-panel joint.

Steel tube with wall thickness of 3.2 mm.

Art.-No. 042

Telescopic beam for making shaft platforms.

Art.-No. 110

For making a formwork-side railing on the Xsafe plus platform.

Art.-No. 113

Art.-No. 580470000

Erecting safety railings at exposed outer edges.

Art.-No. 581120000

Lost form-tie component for single-sided formwork tying.

Art.-No. 581448000

Tightening and loosening cone screws.

Art.-No. 581692000

Securing cantilever positioning cones when it is not possible to drill through the formwork sheeting.

Art.-No. 581890000

Expendable form-tie component for single-sided tying.

Art.-No. 581891000

Closing the opening left in the concrete by the bridge edge beam support.

Art.-No. 581896000

Expendable form-tie component for single-sided tying.

Art.-No. 581966000

Connector with captive support plate used with tie rods.

Art.-No. 581984000

Expendable form-tie component for single-sided tying.

Art.-No. 584384000

Fall protection on the structure.

Art.-No. 584385000

Pushed into the fresh concrete, push-in socket for the Handrail post 1.10m.