Expendable form-tie component for single-sided tying.

N.º art. 116

N.º art. 588651000

Telescopic tool for operating the Framax lifting hook from ground level.

N.º art. 068968

N.º art. 069423

Hand scraper for removing concrete from formwork elements.

N.º art. 069431

Telescopic steel prop.

N.º art. 161

Cost-effective and lightweight, the Doka beam H20 basic P is a solid-web beam with its low weight and proven end reinforcement in the form of bevelled beam ends. (EN 13377-compliant).

N.º art. 162

Plywood sheet made of Nordic birch with 120 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

N.º art. 229

Triangular ledge with soft plastic lips for close fit to the surface of the panel. Used for making no-nails outside corners and column formwork with universal panels.

N.º art. 260

Triangular ledge with soft plastic lips for close fit to the surface of the panel. Used for making no-nails outside corners and column formwork with universal panels.

N.º art. 278

N.º art. 316052575

The inner guardrail extended is used to shield the inner side of a staircase tower at the exit providing a guardrail at landing bay. Available for stair lengths of 2.57m and 3.07m.

N.º art. 306010600

The base jack is used to adjust the height of the scaffold. For base jack 60cm height adjustability is 40 – 450 mm.

N.º art. 316080005

The inner guardrail is used to shield the inner side of a staircase tower. The inner guardrail suits for both stair lengths of 2.57m, 3.07m.

N.º art. 586646000

Storage and transport device for Protective barriers Z.

The outer guardrail is used to shield the outer side of the staircase tower. Outer guardrails are available for stair lengths of 2.57m, 3.07m. The outer guardrail has a Swivel Wedge Terminal that allows to fix it to the rosette.

N.º art. 455

Plywood sheet made of unsanded chinese poplar veneers. Both sides are coated with 160 g/m² Black phenolic-resin film. Bonding will pass a 24 h boiling test.

N.º art. 485

Release agent specially for smooth formwork surfaces.

N.º art. 496

Release agent specially for absorbent formwork surfaces.

N.º art. 521

Plywood sheet made of Chinese eucalyptus veneers with 130 g/m² phenolic-resin film coating on both sides. The melamine-resin glue-bonding of the panel passes the 24 h boiling test to the Chinese standard. The edges are sealed with acrylic-resin varnish.

N.º art. 532

Plywood sheet made of Chinese eucalyptus with 240 g/m² phenolic-resin film coating on both sides. The phenolic resin bond of the sheet passes a 72-hour boiling test. The edges are sealed with acrylic-resin varnish.

N.º art. 533