The durable formwork beam with a solid-web design

High-quality, robust, long-lasting – The Doka H20 top P beam is a durable formwork beam in solid-web design with a web made of special flat-pressed sheet that can be used in wall and slab formwork systems. The innovative polyurethane beam-end caps reduce damage and guarantee a service life that is up to three times longer.

Art.-nr. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Art.-nr. 004

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Art.-nr. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-nr. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-nr. 007

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-nr. 008

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Art.-nr. 022

EN 1065-compliant telescopic construction prop, made of steel.

Art.-nr. 024

EN 1065-compliant telescopic construction prop, made of steel.

Art.-nr. 025

Doka-Deckenstützen Eurex eco sind Baustützen aus Stahl mit Ausziehvorrichtung, entsprechend EN 1065. Sie dienen als vertikale Stützen für temporäre Konstruktionen.

Art.-nr. 026

Self-cleaning threadbar

Art.-nr. 029

Self-cleaning threadbar

Art.-nr. 030

Grating for safety barriers on the formwork or on the structure.

Art.-nr. 043

Bracing gangforms, infills and corners and forming stop-ends.

Art.-nr. 075

Bracing load-bearing tower frames.

Art.-nr. 076

Infilling along edges and around columns.

Art.-nr. 079

For forming large floor areas.

Art.-nr. 082

Grille made up of primary and secondary beams with swivel heads, for sheeting with any formwork sheeting.

Art.-nr. 083

Post for safety barriers on the formwork or on the structure.

Art.-nr. 089

Making assembly platforms with integral manhole.

Art.-nr. 091