Timber formwork beam H20 top is a solid-web beam in accordance with EN 13377 with innovative polyurethane end reinforcement for increased resistance to mechanical stresses and strains.

Art.-No. 003

The tried-and-tested formwork beam in solid-web design

High-quality, hard-wearing, durable – The Doka beam H20 eco N is a dimensionally stable solid wall beam with a three-ply sheet web and proven end-reinforcement by bevelling the beam ends and an extra plastic rivet in the beam chord. The beam can be used in wall and slab formwork systems.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 004

The tried-and-tested formwork beam in solid-web design

High-quality, hard-wearing, durable – The Doka beam H20 eco P is a dimensionally stable solid wall beam with a web made of special flat-pressed sheet and proven end-reinforcement by bevelling the beam ends and an extra plastic rivet in the beam chord. The beam can be used in wall and slab formwork systems.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 005

The high-performance quality sheet for special requirements and many uses

The Doka formwork sheet 3-SO is a high-grade three-ply solid-wood sheet with urea-melamine resin coating on both sides for horizontal and vertical formwork applications. It offers first-class concrete results due to selected wood quality and excellent surface finishing.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 007

The inexpensive three-layer sheet for all standard applications

The Formwork sheet 3S basic is a three-ply solid-wood sheet with urea-melamine resin coating on both sides for many different uses on construction sites, which is suitable for repeated use. Less reworking costs are incurred due to high dimensional and angular accuracy.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 008

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 009

3-ply infill sheet made of spruce, crosswise glued, without edge strip. Surface enhanced with urea-melamine resin adhesive.

Art.-No. 011

High-grade plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-No. 017

The large-format exposed concrete sheet made of Nordic birch for high exposed concrete requirements and application figures

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The edges are sealed with high-grade 2-component edge protection varnish.

Art.-No. 019

The robust birch plywood sheet for smooth exposed concrete surfaces

DokaPly Birch DC 21mm is a birchwood-veneer plywood sheet with 220 g/m² film coating on both sides, for horizontal and vertical formwork applications subject to ultra-high requirements for the concrete surfaces.

Art.-No. 022

The extra long-lived floor prop with impact protector

The robust and long-lived Eurex 20 top floor prop impresses with a high minimum load capacity of 20 kN and complies with prop classes D, B/D or C/D in accordance with standard EN 1065. The integrated impact protector reliably protects the outer tube from mechanical damage and significantly increases the life span of the tubular steel prop.

Art.-No. 024

The extra long-lived floor prop with impact protector

The robust and long-lived Eurex 30 top floor prop impresses with a high minimum load capacity of 30 kN and complies with prop classes C/E in accordance with standard EN 1065. The integrated impact protector reliably protects the outer tube from mechanical damage and significantly increases the life span of the tubular steel prop.

Art.-No. 025

The floor prop with high load capacity and safe handling

The tested quality prop Eurex 20 eco from Doka is characterised by a high minimum load capacity of 20 kN and corresponds to prop class B/D in accordance with standard EN 1065. The steel props also impress with their simple and safe handling and their impressive price-performance ratio.

Are you looking for props with an extension length of 300 or 350? These models are now available as part of the Doka floor prop Eurex 20 eco .

Art.-No. 026

Self-cleaning threadbar

Art.-No. 029

Self-cleaning threadbar

Art.-No. 030

Self-cleaning threadbar

Art.-No. 032

Self-cleaning threadbar

Art.-No. 033

Expendable form-tie distance tube for retrievable form ties in fair-faced concrete.

Art.-No. 034

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Art.-No. 035