Timber formwork beam H20 top is a solid-web beam in accordance with EN 13377 with innovative polyurethane end reinforcement for increased resistance to mechanical stresses and strains.

Art.-No. 003

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 008

EN 1065-compliant telescopic construction prop, made of steel.

Art.-No. 024

Self-cleaning threadbar

Art.-No. 029

Self-cleaning threadbar

Art.-No. 030

Steel tube with wall thickness of 3.2 mm.

Art.-No. 042

Grating for safety barriers on the formwork or on the structure.

Art.-No. 043

Bracing gangforms, infills and corners and forming stop-ends.

Art.-No. 075

Art.-No. 580470000

Erecting safety railings at exposed outer edges.

Art.-No. 581448000

Tightening and loosening cone screws.

Art.-No. 581961000

Connector in use with anchor plates and tie rods.

Art.-No. 581964000

Connector in use with anchor plates and tie rods.

Art.-No. 581966000

Connector with captive support plate used with tie rods.

Art.-No. 586148000

Supporting side formwork of drop beams and slab stop-ends.

Art.-No. 586149000

In combination with Beam forming support 20, adapting to the height of drop beams and slab stop-ends.

Art.-No. 586170000

Floor-prop head for supporting and stabilising Doka formwork beams.

Art.-No. 586179000

Securing intermediate props to prevent toppling.

Art.-No. 586182000

Aid for working with Doka formwork beams in the floor formwork system during forming up and stripping out operations.

Art.-No. 588151000

Bracing right-angled inside corners.

Art.-No. 588152000

Securing universal walings to the formwork.