Timber formwork beam H20 top is a solid-web beam in accordance with EN 13377 with innovative polyurethane end reinforcement for increased resistance to mechanical stresses and strains.

Artikel nr. 003

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Artikel nr. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Artikel nr. 008

EN 1065-compliant telescopic construction prop, made of steel.

Artikel nr. 024

EN 1065-compliant telescopic construction prop, made of steel.

Artikel nr. 026

Self-cleaning threadbar

Artikel nr. 029

Self-cleaning threadbar

Artikel nr. 030

Steel tube with wall thickness of 3.2 mm.

Artikel nr. 042

Grating for safety barriers on the formwork or on the structure.

Artikel nr. 043

Bracing gangforms, infills and corners and forming stop-ends.

Artikel nr. 075

Post for safety barriers on the formwork or on the structure.

Artikel nr. 089

Artikel nr. 580470000

Erecting safety railings at exposed outer edges.

Artikel nr. 581448000

Tightening and loosening cone screws.

Artikel nr. 581961000

Connector in use with anchor plates and tie rods.

Artikel nr. 581964000

Connector in use with anchor plates and tie rods.

Artikel nr. 581966000

Connector with captive support plate used with tie rods.

Artikel nr. 586148000

Supporting side formwork of drop beams and slab stop-ends.

Artikel nr. 586149000

In combination with Beam forming support 20, adapting to the height of drop beams and slab stop-ends.

Artikel nr. 586170000

Floor-prop head for supporting and stabilising Doka formwork beams.

Artikel nr. 586179000

Securing intermediate props to prevent toppling.