Art.-No. 024

The Doka Floor prop Eurex 30 top has an integrated impact protector (except for length 550) for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 30 kN at any extension length and corresponds to prop class C/E according to EN 1065.

Art.-No. 025

Art.-No. 026

Art.-No. 586155500

For securing floor props

Art.-No. 586145000

For securing floor props

Art.-No. 586294000

Set-up aid for floor props.

Art.-No. 586174000

Floor-prop head for supporting and stabilising Doka formwork beams, with integral quick-lowering feature.

Art.-No. 586170000

Floor-prop head for supporting and stabilising Doka formwork beams.

Art.-No. 582528000

Connection resistant to tensile and compressive forces to secure profiles telescoped into each other.

Art.-No. 586179000

Securing intermediate props to prevent toppling.

Art.-No. 586148000

Supporting side formwork of drop beams and slab stop-ends.

Art.-No. 586149000

In combination with Beam forming support 20, adapting to the height of drop beams and slab stop-ends.

Art.-No. 586257000

Installation of the Doka floor end-shutter clamp.

Art.-No. 586555000

Mobile working platform with ladder for working at high points.

Art.-No. 582768000

Makes nuts easier to loosen. At screw jack foot and Doka floor props, among others.

Art.-No. 586182000

Aid for working with Doka formwork beams in the floor formwork system during forming up and stripping out operations.

Dimensionally stable solid-web beam with three-ply web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.-No. 002

Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.-No. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Note: For fast shipping, currently only available in the sizes 2,9m 3,9m and 4,9m

Art.-No. 004

Preizkušen opažni nosilec s polno stojino stabilne oblike.

Visokokakovosten, vzdržljiv in izjemno trpežen nosilec H20 eco P je dimenzijsko stabilen nosilec s stisnjeno prešano ploščo in ojačitvijo z odrezanimi zaključnimi robovi in plastičnimi vložki.
Nosilec je primeren za uporabo v stenskih in stropnih opažnih sistemih.

Art.-No. 005