Steel tube with wall thickness of 3.2 mm.

Art.-No. 042

Art.-No. 582560000

For connecting two Scaffold tubes 48.3mm at any angle.

Art.-No. 682004000

For connecting two Scaffold tubes 48.3mm at an angle of 90°.

Art.-No. 068968

Art.-No. 318073075

Ladder hatch decks are used to make access hatches in working platforms. They are laid directly on the ledgers and secured with the integral lift-out guard. The integrated ladder enables access to the next level. The ladder needs a support at the bottom (decks). Available in lengths of 2.07m, 2.57m and 3.07m.

Art.-No. 318072575

Ladder hatch decks are used to make access hatches in working platforms. They are laid directly on the ledgers and secured with the integral lift-out guard. The integrated ladder enables access to the next level. The ladder needs a support at the bottom (decks). Available in lengths of 2.07m, 2.57m and 3.07m.

Art.-No. 318072075

Ladder hatch decks are used to make access hatches in working platforms. They are laid directly on the ledgers and secured with the integral lift-out guard. The integrated ladder enables access to the next level. The ladder needs a support at the bottom (decks). Available in lengths of 2.07m, 2.57m and 3.07m.

Art.-No. 315082075

Stair stringers are the diagonal side members of the 10-leg stair system. The stringers must be used in pairs to support the stair treads. The stringers are used for a typical 2.0m lift height.

Art.-No. 315072075

Stair stringers are the diagonal side members of the 10-leg stair system. The stringers must be used in pairs to support the stair treads. The stringers are used for a typical 2.0m lift height.

Art.-No. 315020890

Stair treads are the horizontal members interconnecting to the two stringers of a stairway, forming the treads of the stair system. They are designed for a 1.036m (1.04m) bay width.

Art.-No. 310067005

Access barriers are designed for use as guardrails at the top and bottom of the Aluminum 4-leg platform stairs and can also be used as barriers round ladder-access hatches in platforms.

Art.-No. 306030780

The Swivel base jack is used as a starting base for a scaffold. It is adjustable in height and angle to allow for compensation on uneven surfaces so that a level scaffold is always attainable.

Art.-No. 306010600

The base jack is used to adjust the height of the scaffold. For base jack 60cm height adjustability is 40 – 450 mm.

Art.-No. 301793000

Standards hanging no spigot are used as verticals to transmit loads to the ground. The absence of spigots means they can be used for shoring applications. Standards are available in increment lengths. Rosettes are welded on every 50cm for interconnecting elements. One spigot can be used to join 2 standards. These standards are suitable for suspended scaffolds

Art.-No. 301792000

Standards hanging no spigot are used as verticals to transmit loads to the ground. The absence of spigots means they can be used for shoring applications. Standards are available in increment lengths. Rosettes are welded on every 50cm for interconnecting elements. One spigot can be used to join 2 standards. These standards are suitable for suspended scaffolds

Art.-No. 301791500

Standards hanging no spigot are used as verticals to transmit loads to the ground. The absence of spigots means they can be used for shoring applications. Standards are available in increment lengths. Rosettes are welded on every 50cm for interconnecting elements. One spigot can be used to join 2 standards. These standards are suitable for suspended scaffolds

Art.-No. 301791000

Standards hanging no spigot are used as verticals to transmit loads to the ground. The absence of spigots means they can be used for shoring applications. Standards are available in increment lengths. Rosettes are welded on every 50cm for interconnecting elements. One spigot can be used to join 2 standards. These standards are suitable for suspended scaffolds

Art.-No. 301790500

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Art.-No. 301166145

Lattice girders are used to bear heavy loads across large spans or to construct a bridging structure within the scaffold. Lattice girders are available in lengths of 5.14m, 6.14m and 7.71m. They are 50cm in depth and have terminal wedges to lock to the rosettes of the standards. They come without spigots, but separate spigots can be used.

One package contains 20 pieces.

Art.-No. 301165145

Lattice girders are used to bear heavy loads at large spans or to create a bridging construction within the scaffold. Lattice girders are available in 5.14m, 6.14m, 7.71m. They are 50cm in depth and equipped with Terminal Wedges to connect to the rosettes on the standards. They come without spigot, but a separate spigot can be used.

One package contains 20 pieces.