Steel tube with wall thickness of 3.2 mm.

Art.-nr. 042

Art.-nr. 582560000

For connecting two Scaffold tubes 48.3mm at any angle.

Art.-nr. 682004000

For connecting two Scaffold tubes 48.3mm at an angle of 90°.

Art.-nr. 068968

Art.-nr. 318073075

Ladder hatch decks are used to make access hatches in working platforms. They are laid directly on the ledgers and secured with the integral lift-out guard. The integrated ladder enables access to the next level. The ladder needs a support at the bottom (decks). Available in lengths of 2.07m, 2.57m and 3.07m.

Art.-nr. 318072575

Ladder hatch decks are used to make access hatches in working platforms. They are laid directly on the ledgers and secured with the integral lift-out guard. The integrated ladder enables access to the next level. The ladder needs a support at the bottom (decks). Available in lengths of 2.07m, 2.57m and 3.07m.

Art.-nr. 318072075

Ladder hatch decks are used to make access hatches in working platforms. They are laid directly on the ledgers and secured with the integral lift-out guard. The integrated ladder enables access to the next level. The ladder needs a support at the bottom (decks). Available in lengths of 2.07m, 2.57m and 3.07m.

Art.-nr. 315082075

Stair stringers are the diagonal side members of the 10-leg stair system. The stringers must be used in pairs to support the stair treads. The stringers are used for a typical 2.0m lift height.

Art.-nr. 315072075

Stair stringers are the diagonal side members of the 10-leg stair system. The stringers must be used in pairs to support the stair treads. The stringers are used for a typical 2.0m lift height.

Art.-nr. 315020890

Stair treads are the horizontal members interconnecting to the two stringers of a stairway, forming the treads of the stair system. They are designed for a 1.036m (1.04m) bay width.

Art.-nr. 310067005

Access barriers are designed for use as guardrails at the top and bottom of the Aluminum 4-leg platform stairs and can also be used as barriers round ladder-access hatches in platforms.

Art.-nr. 306030780

Die Gewindefussplatte schwenkbar wird als Startbasis für ein Gerüst verwendet. Sie ist in der Höhe und im Winkel verstellbar, um Unebenheiten auszugleichen, so dass immer ein ebenes Gerüst entsteht.

Art.-nr. 306010600

Die Gewindefussplatte wird zur Höhenverstellung des Gerüstes verwendet. Bei der Gewindefussplatte 60cm beträgt die Höhenverstellbarkeit 40 - 450 mm.

Art.-nr. 301793000

Standards hanging no spigot are used as verticals to transmit loads to the ground. The absence of spigots means they can be used for shoring applications. Standards are available in increment lengths. Rosettes are welded on every 50cm for interconnecting elements. One spigot can be used to join 2 standards. These standards are suitable for suspended scaffolds

Art.-nr. 301792000

Standards hanging no spigot are used as verticals to transmit loads to the ground. The absence of spigots means they can be used for shoring applications. Standards are available in increment lengths. Rosettes are welded on every 50cm for interconnecting elements. One spigot can be used to join 2 standards. These standards are suitable for suspended scaffolds

Art.-nr. 301791500

Standards hanging no spigot are used as verticals to transmit loads to the ground. The absence of spigots means they can be used for shoring applications. Standards are available in increment lengths. Rosettes are welded on every 50cm for interconnecting elements. One spigot can be used to join 2 standards. These standards are suitable for suspended scaffolds

Art.-nr. 301791000

Standards hanging no spigot are used as verticals to transmit loads to the ground. The absence of spigots means they can be used for shoring applications. Standards are available in increment lengths. Rosettes are welded on every 50cm for interconnecting elements. One spigot can be used to join 2 standards. These standards are suitable for suspended scaffolds

Art.-nr. 301790500

Stiele 0,50m ohne Rohrverbinder HS werden als "Vertikale" verwendet, um Lasten auf den Boden zu übertragen. Die Tatsache, dass sie keine Rohrverbinder haben, ermöglicht es, sie für Shoring Anwendungen zu verwenden. Die Stiele sind in verschiedenen Längen erhältlich. Alle 50 cm sind Rosetten eingeschweißt, die es ermöglichen, eine Verbindung zwischen verschiedenen Elementen herzustellen. Um 2 Stiele zu verbinden, muss ein Rohrverbinder verwendet werden. Diese Stiele sind für Hängegerüste zu verwenden.

Art.-nr. 301166145

Lattice girders are used to bear heavy loads across large spans or to construct a bridging structure within the scaffold. Lattice girders are available in lengths of 5.14m, 6.14m and 7.71m. They are 50cm in depth and have terminal wedges to lock to the rosettes of the standards. They come without spigots, but separate spigots can be used.

Eine Packung besteht aus 20 Stück.

Art.-nr. 301165145

Gitterträger werden verwendet, um schwere Lasten bei großen Spannweiten zu tragen oder um eine Überbrückungskonstruktion innerhalb des Gerüsts zu schaffen. Die Gitterträger sind in den Längen 5,14 m, 6,14 m und 7,71 m erhältlich. Sie haben eine Tiefe von 50 cm und sind mit Klemmkeilen zum Anschluss an die Rosetten der Ständer ausgestattet. Sie werden ohne Rohranschluss geliefert, es kann jedoch ein separater Rohranschluss verwendet werden.

Eine Packung besteht aus 20 Stück.