Réf. 306010600

Le vérin de pied est utilisé pour régler la hauteur de l'échafaudage. Avec un vérin de base 60cm, le réglage en hauteur est de 40 - 450 mm.

Réf. 306030780

Le vérin de base pivotant est utilisé comme base de départ pour un échafaudage. Il est réglable en hauteur et en angle pour compenser les irrégularités de façon à avoir toujours un échafaudage plan.

Réf. 301270000

The base collar with a single rosette is placed on the base jack and forms an easy base for the rest of the scaffold. The base collar makes the alignment of a modular structure easier.

Réf. 328450600

Le vérin de tête en croix est prévu pour le montage sur le dessus d'un échafaudage, en particulier pour l'utilisation dans l'étaiement où une ou plusieurs poutrelle(s) doivent être supportées.

Réf. 328460600

Le vérin de tête est prévu pour le montage sur le dessus d'un échafaudage. Cela concerne notamment les applications dans lesquelles des poutrelles doivent être supportées. En variante, le vérin de tête peut également être employé à la base de l'échafaudage en le retournant.

Réf. 301010500

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Réf. 301011000

Des montants 1,00m avec manchon sont utilisés en tant que « verticales » pour transférer des charges au sol. Des disques perforés sont soudés tous les 50 cm. Ils permettent de relier les différents panneaux. Ces montants ne conviennent pas pour les échafaudages suspendus ! Les montants sont disponibles en différentes longueurs de 0,50 m à 4,00 m.

Réf. 301011500

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Réf. 301012000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Réf. 301012500

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Réf. 301013000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Réf. 301790500

Des montants 0,50m sans manchons HS sont utilisés en tant que « verticales » pour transférer des charges au sol. Le fait qu'ils n'aient pas de manchons permet de les utiliser pour des applications d'étaiement. Les montants sont disponibles en différentes longueurs. Des disques perforés sont soudés tous les 50 cm. Ils permettent de relier différents panneaux. Pour connecter 2 montants, il faut utiliser un manchon. Ces montants doivent être utilisés pour les échafaudages suspendus.

Réf. 301791000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Réf. 301791500

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Réf. 301792000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Réf. 301792500

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Réf. 301793000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Réf. 319022575

Le planchon à trappe alu 257 cm sert de trappe d'échafaudage légère et extra large avec échelle intégrée. Il n'est disponible qu'en 2,57m.

Réf. 319023075

The Ladder Hatch Plank acts as a lightweight, extra wide Scaffold Plank which incorporates a hatch and a ladder.

Réf. 338191000

Le tube d'ancrage au voile est conçu de manière pouvoir être fixé sur un tube d'échafaudage et se raccorde sur une structure porteuse. Il est disponible en 1,00 m et 1,50 m.