Kaal / tk | 0.07 kg |
---|---|
Pind | Galvanised |
Pakkekogus | 100 pcs. |
- Logige sisse
- Kontaktivorm
- EN
-
-
Ameerika Ühendriigid
-
Araabia Ühendemiraadid
-
Austraalia
-
Austria
-
Belgia
-
Bulgaaria
-
Hispaania
-
Holland
-
Horvaatia
-
Itaalia
-
Kanada
-
Katar
-
Kreeka
-
Läti
-
Leedu
-
Luksemburg
-
Norra
-
Omaan
-
Peruu
-
Poola
-
Portugal
-
Prantsusmaa
-
Rootsi
-
Rumeenia
-
Saksamaa
-
Saudi-Araabia
-
Serbia
-
Slovakkia
-
Sloveenia
-
Soome
-
Suurbritannia
-
Šveits
-
Taani
-
Tšehhi
-
Tšiili
-
Türgi
-
Ukraina
-
Ungari
-
Kuidas toimub materjaliloendite üleslaadimine?
1. samm: Materjaliloendi veebipoodi üleslaadimiseks tuleb luua CSV-fail:
- tootenr veergu A
- kogus veergu B (tk)
- valikuline: tehingu tüüp veerus C (1 = uue müük, 2 = kasutatud müük, 3 = rent)
2. samm: Laadige CSV-fail üles
3. samm: Klõpsake nuppu "Materjaliloendi üleslaadimine"
- Avaleht
- Components & Accessories
- 3-ply formwork sheets
- U Profile – Spacers - Wedges
- Spacers 20cm 100pcs/bag
Täiendav teave
Tooteinfo
Spacers for wooden formwork.
The high elasticity of the steel used allows the creation of long fins at an angle of 90 degrees, which helps to effectively fix the panel without damaging its edges, this facilitating an efficient assembly of the formwork system.
- Available sizes: 20cm,25cm,30cm,35cm
- The first spacer should not be more than 5 cm from the edge of the panel
- Carefully check the correct connection between spacers and wedges, in no case will the hammer be used for joining
- Respect the installation distance between spacers depending on the project and the casting height
- Casting is done slowly, without sudden discharges, especially at the base of the formwork
- The filling speed must not exceed 2.5 m/h per height
Tehnilised andmed
Saab kasutada järgmiste süsteemidega
Nõusolek küpsiste kasutamiseks ja andmete edastamiseks Ameerika Ühendriikidesse
Täiendavat teavet küpsiste kasutamise ja küpsistest keeldumise võimaluste kohta leiate meie andmekaitsedeklaratsioonist.