The universal birch plywood sheet for smooth concrete surfaces

DokaPly Birch SC 21mm is a birchwood-veneer plywood sheet with 120 g/m² film coating on both sides, for horizontal and vertical formwork applications subject to ultra-high requirements for the concrete surfaces.

Réf. 229

The robust birch plywood sheet for smooth exposed concrete surfaces

DokaPly Birch DC 21mm is a birchwood-veneer plywood sheet with 220 g/m² film coating on both sides, for horizontal and vertical formwork applications subject to ultra-high requirements for the concrete surfaces.

Réf. 022

The affordable plywood sheet for cut-outs and offcuts

CUTplex basic is a veneered, film-coated poplar plywood sheet with a 160 g/m² phenolic resin film coating on both sides for subordinate applications and offcuts - e.g. for use as construction plywood for various on-site applications.

Réf. 485

Réf. 899900008

The affordable plywood sheet for cut-outs and offcuts

CUTplex basic pine is a veneered, film-coated plywood panel made of poplar (core layer) and pine (cover layers) with a 160 g/m² phenolic resin film coating on both sides for subordinate applications and offcuts - e.g. for use as construction plywood for various on-site applications.

Quantité par paquet : 45 pcs.

Réf. 185303500

The acacia plywood panel for simple concrete and fitting surfaces

UNIplex basic is a acacia plywood sheet with a 125 g/m² phenolic resin film coating on both sides for the simplest requirements.

Quantité par paquet : 43 pcs.

Réf. 185341000

The poplar plywood sheet for even concrete and fitting surfaces

UNIplex plus is a poplar plywood sheet with a 220 g/m² phenolic resin film coating on both sides for the simplest requirements.

Quantité par paquet : 20 pcs.

The plywood sheet for concrete surfaces without special requirements

EUCAplex plus is a eucalyptus veneer plywood sheet with 240 g/m² film coating on both sides, for horizontal and vertical formwork applications.

Réf. 533

Plywood sheet made of Chinese eucalyptus with 240 g/m² phenolic-resin film coating on both sides. The phenolic resin bond of the sheet passes a 72-hour boiling test. The edges are sealed with acrylic-resin varnish.

Réf. 622

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Réf. 019

Réf. 185019000

Water-repellent one-component paint for sealing cut faces and drilled holes in formwork sheets.

Réf. 185061500

Réf. 701