Timber formwork beam H20 top is a solid-web beam in accordance with EN 13377 with innovative polyurethane end reinforcement for increased resistance to mechanical stresses and strains.

Réf. 003

Timber formwork beam H20 top is a solid-web beam in accordance with EN 13377 with innovative polyurethane end reinforcement for increased resistance to mechanical stresses and strains.

Réf. 002

Timber formwork beam H20 eco N is a solid-web beam in accordance with EN 13377 with proven end reinforcement in the form of bevelled beam ends and extra plastic rivet in the beam flange.

Réf. 004

Timber formwork beam H20 eco P is a sold-web beam in accordance with EN 13377 with proven end reinforcement in the form of bevelled beam ends and extra plastic rivet in the beam flange.

Réf. 005

The Doka formwork sheet 3-SO is a high-grade three-ply solid-wood sheet with urea-melamine resin coating on both sides for horizontal and vertical formwork applications.

Réf. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Réf. 007

The Formwork sheet 3S basic is a three-ply solid-wood sheet with urea-melamine resin coating on both sides for many different uses on construction sites.

Réf. 008

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Réf. 009

3-ply infill sheet made of spruce, crosswise glued, without edge strip. Surface enhanced with urea-melamine resin adhesive.

Réf. 011

High-grade plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Réf. 017

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Réf. 019

DokaPly Birch is a birchwood-veneer plywood sheet with film coating on both sides, for horizontal and vertical formwork applications.

Réf. 022

Doka floor props Eurex 20 top are adjustable telescopic steel props that conform to EN 1065.
They are designed for use as vertical props for temporary structures.

Réf. 024

EN 1065-compliant telescopic construction prop, made of steel.

Réf. 025

EN 1065-compliant telescopic construction prop, made of steel.

Réf. 026

Self-cleaning threadbar

Réf. 029

Self-cleaning threadbar

Réf. 030

Self-cleaning threadbar

Réf. 032

Self-cleaning threadbar

Réf. 033

Expendable form-tie distance tube for retrievable form ties in fair-faced concrete.

Réf. 034