Timber formwork beam H20 top is a solid-web beam in accordance with EN 13377 with innovative polyurethane end reinforcement for increased resistance to mechanical stresses and strains.

Réf. 003

Der Holzschalungsträger H20 eco N ist ein Vollwandträger gemäß EN 13377 mit bewährter Endverstärkung durch Abschrägung der Trägerenden und zusätzlichem Kunststoffniet im Trägergurt.

Réf. 004

Der Holzschalungsträger H20 eco P ist ein Vollwandträger gemäß EN 13377 mit bewährter Endverstärkung durch Abschrägung der Trägerenden und zusätzlichem Kunststoffniet im Trägergurt.

Réf. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Réf. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Réf. 007

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Réf. 022

EN 1065-compliant telescopic construction prop, made of steel.

Réf. 025

EN 1065-compliant telescopic construction prop, made of steel.

Réf. 026

Bracing gangforms, infills and corners and forming stop-ends.

Réf. 075

Bracing load-bearing tower frames.

Réf. 076

Infilling along edges and around columns.

Réf. 079

For forming large floor areas.

Réf. 082

Grille made up of primary and secondary beams with swivel heads, for sheeting with any formwork sheeting.

Réf. 083

Making assembly platforms with integral manhole.

Réf. 091

Basic frame with integral ladder and captive connectors for vertical stacking.

Réf. 105

Making end safety barriers.

Réf. 108

Réf. 581448000

Tightening and loosening cone screws.

Réf. 581961000

Connector in use with anchor plates and tie rods.

Réf. 581964000

Connector in use with anchor plates and tie rods.

Réf. 581966000

Connector with captive support plate used with tie rods.