At form-tie points, protects the form-ply against damage.

Ür. no. 307

Expendable form-tie component for two-sided formwork tying.

Ür. no. 320

Connecting Scaffold tubes 48.3mm at any angle to the vertical tubes of load-bearing tower frames.

Ür. no. 341

For securing plates and accessory parts, for example to multi-purpose walings.

Ür. no. 344

Bearing plate for connectors with form-tie angles up to 15 °.

Ür. no. 349

Ür. no. 319022575

The Alum ladder hatch deck 257cm acts as a lightweight, extra wide scaffold acess deck which incorporates a Ladder. It is available only with 2.57m.

Ür. no. 306010600

The base jack is used to adjust the height of the scaffold. For base jack 60cm height adjustability is 40 – 450 mm.

Ür. no. 301013000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Ür. no. 301012000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Ür. no. 301270000

The base collar with a single rosette is placed on the base jack and forms an easy base for the rest of the scaffold. The base collar makes the alignment of a modular structure easier.

Ür. no. 316080005

The inner guardrail is used to shield the inner side of a staircase tower. The inner guardrail suits for both stair lengths of 2.57m, 3.07m.

Ür. no. 586643000

Grating for safety barriers on the structure.

Ür. no. 586642000

Grating for safety barriers on the structure.

Ür. no. 586646000

Storage and transport device for Protective barriers Z.

Aid for securing and back-staying floor formwork.

Ür. no. 351

The outer guardrail is used to shield the outer side of the staircase tower. Outer guardrails are available for stair lengths of 2.57m, 3.07m. The outer guardrail has a Swivel Wedge Terminal that allows to fix it to the rosette.

Ür. no. 455

Installing form-tie components at an angle of 45 °.

Ür. no. 459

Prevents adhesion between concrete and cone with insulation up to 11 cm thick.

Ür. no. 486

Release agent specially for smooth formwork surfaces.

Ür. no. 496

Framed element made of aluminium with Xlife sheet for craneless forming of right-angle outside corners, stop-ends and column formwork.

Ür. no. 512