Item no. 581854000

Tightening and loosening Super plates, star nuts and wing nuts.

Item no. 581858000

Pushes on to form ties.

Item no. 581861000

Pushes on to the Plastic tube 22mm.

Item no. 581124000

For preparing an anchor point with the Rock anchor spreader unit

Item no. 068968

Item no. 185240000

Plywood sheet made of Chinese poplar with glue-joined face veneers. 120 g/m² phenolic-resin film coating on both sides, brown. Exterior-grade gluing, meets the requirements of a 24 h boil test.

For turning and holding the tie rods.

Item no. 202

Weld-on socket for force-transmitting connection between tie rods.

Item no. 204

Bottom leveling spindle for load-bearing towers.

Item no. 323

Height-adjustable connections between load-bearing tower and superstructure.

Item no. 324

Height-adjustable, anti-tip connection between load-bearing tower and superstructure with one or two formwork secondary beams H20.

Item no. 325

Item no. 342

Item no. 306030780

Swivel base jacks are used as a starting base for a scaffold. Height and inclination are adjustable to compensate for surface irregularities and level the first lift of the scaffold.

Item no. 306010600

Base jacks are used for adjusting the height of the scaffold. Base jacks 60cm height have a 40 – 450 mm range of adjustment.

Item no. 301793000

Standards hanging no spigot are used as verticals to transmit loads to the ground. The absence of spigots means they can be used for shoring applications. Standards are available in increment lengths. Rosettes are welded on every 50cm for interconnecting elements. One spigot can be used to join 2 standards. These standards are suitable for suspended scaffolds

Item no. 301792000

Standards hanging no spigot are used as verticals to transmit loads to the ground. The absence of spigots means they can be used for shoring applications. Standards are available in increment lengths. Rosettes are welded on every 50cm for interconnecting elements. One spigot can be used to join 2 standards. These standards are suitable for suspended scaffolds

Item no. 301791500

Standards hanging no spigot are used as verticals to transmit loads to the ground. The absence of spigots means they can be used for shoring applications. Standards are available in increment lengths. Rosettes are welded on every 50cm for interconnecting elements. One spigot can be used to join 2 standards. These standards are suitable for suspended scaffolds

Item no. 301791000

Standards hanging no spigot are used as verticals to transmit loads to the ground. The absence of spigots means they can be used for shoring applications. Standards are available in increment lengths. Rosettes are welded on every 50cm for interconnecting elements. One spigot can be used to join 2 standards. These standards are suitable for suspended scaffolds

Item no. 301790500

Standards hanging no spigot are used as verticals to transmit loads to the ground. The absence of spigots means they can be used for shoring applications. Standards are available in increment lengths. Rosettes are welded on every 50cm for interconnecting elements. One spigot can be used to join 2 standards. These standards are suitable for suspended scaffolds

Item no. 301166145

Lattice girders are used to bear heavy loads across large spans or to construct a bridging structure within the scaffold. Lattice girders are available in lengths of 5.14m, 6.14m and 7.71m. They are 50cm in depth and have terminal wedges to lock to the rosettes of the standards. They come without spigots, but separate spigots can be used.