Steel tube with wall thickness of 3.2 mm.

Art.-No. 042

Art.-No. 581692000

Securing cantilever positioning cones when it is not possible to drill through the formwork sheeting.

Art.-No. 581890000

Expendable form-tie component for single-sided tying.

Art.-No. 581896000

Expendable form-tie component for single-sided tying.

Art.-No. 581984000

Expendable form-tie component for single-sided tying.

Art.-No. 584384000

Fall protection on the structure.

Art.-No. 584385000

Pushed into the fresh concrete, push-in socket for the Handrail post 1.10m.

Package size: 100 pcs.

Art.-No. 586456000

Making safety barriers on the structure or on the formwork.

Art.-No. 580428000

Making post-casting suspension points for Folding platforms A and K with rock anchor spreader unit.

Art.-No. 580495000

Suspending Folding platforms A, B and K with insulation up to 11 cm thick.

Art.-No. 580579000

Releasing the positioning cones.

Art.-No. 580589000

Art.-No. 580608000

For making box-outs in the concrete to take the supports for the latches for shaft platforms.

Art.-No. 581123000

Retrievable tube for installation of the rock anchor spreader unit.

Art.-No. 581699000

Positioning cone for suspension cone with larger bearing surface.

Art.-No. 581889000

Closing the opening left in the concrete by the bridge edge beam support, with corrosion protection.

Art.-No. 581895000

Making a suspension point.

Package size: 30 pcs.

Art.-No. 581897000

Securing the bridge edge beam support to the formwork.

Package size: 100 pcs.

Art.-No. 581971000

Suspending Folding platforms A, B and K.

Art.-No. 581973000

Positioning cone for suspension cone in fair-faced concrete for a regular hole pattern.