Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

N.º art. 844

N.º art. 319023075

The Ladder Hatch Plank acts as a lightweight, extra wide Scaffold Plank which incorporates a hatch and a ladder.

N.º art. 310067004

The Access barriers are designed to be used as a guardrail at the top and bottom of the Aluminum 4 leg Platform Stairs and can also be used to provide barriers around gaps in platforms for ladder access.

N.º art. 333040005

The Ballast weight holder secures to the Standard to prevent overturning when used with Ballast weights.

N.º art. 333040015

The Ballast weight is installed onto the Ballast weight holder.

N.º art. 301880735

Allows advancing guard rail protection during erection, modification and dismantling of the scaffold.

N.º art. 301881095

Allows advancing guard rail protection during erection, modification and dismantling of the scaffold.

N.º art. 316110015

Guard rail closing the inner side of the topmost stair tower level.

N.º art. 680041000

The safe traffic route to all work levels

Construction stair towers are the quickest and easiest way to access the various scaffold levels or working levels on the construction site. They provide safe access, even when carrying materials or tools.

The Ladder Hatch Plank acts as a lightweight, extra wide Scaffold Plank which incorporates a hatch.

N.º art. 722

Lattice girders are used to bear heavy loads at large spans or to create a bridging construction within the scaffold. Lattice girders are available in 5.14m, 6.14m, 7.71m. They are 50cm in depth and equipped with Terminal Wedges to connect to the rosettes on the standards. They come without spigot, but a separate spigot can be used.

N.º art. 723

Ledger to plan transoms can be placed between one deck and one ledger within a bay to support decks e.g. for making ladder openings or create openings. They are available in widths equivalent to 1, 2 and 3 Boards.

N.º art. 810

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

N.º art. 845

N.º art. 397320000

The Base jack handle is installed ontop of a Base collar or Standard to prevent uplift in Rebar scaffold configurations.

N.º art. 304032004

The Beam clamp forged rigid is designed to connect scaffold tube to the flanges of structural steel beams. They can also be used to support suspended scaffold from structural steel.

N.º art. 304042004

The Beam clamp swivel is designed to connect scaffold tube to the flanges of structural steel beams. They can also be used to support suspended scaffold and create a variety of angles. They are used when the support members are not in the same direction as the scaffold.

N.º art. 301121095

The Side bracket 1.09m is used at the edge of a scaffold to extend or widen the working platform.

N.º art. 305082004

The Girder spigot adapter clamp is to be used with the Lattice girder and allows to put a standard and great guardrail or increase the scaffold with smaller bays above.

N.º art. 306110004

The base jack retention prevents the kicker lift to fall off when hoisting the scaffold. It has a terminal wedge and a half coupler allowing to high versatility of the component.

N.º art. 301520014

The Lifting lug attaches to the top of a Standard for Hanging Scaffolds and acts as a connection point for rigging.