Artikel nr. 589223000

Är till för vattentät och eldbeständig förslutning av förankringsställena i betongen.

Förpackningsstorlek: 100 st.

Artikel nr. 588651000

Teleskopiskt verktyg för att manövrera Framax kranbygel från marken.

Artikel nr. 589288000

Är till för att försluta förankringsställena i betongen.

Artikel nr. 759040305

Artikel nr. 759040306

Artikel nr. 589280500

Förslutning av staghylsor som inte behövs i Framax Xlife plus ramluckan.

Stämp av stål med teleskopisk anordning.

Artikel nr. 161

Stödplatta för koppling.

Artikel nr. 201

För infästning av fotbräda på skyddsräcksstolpe XP

Artikel nr. 279

Artikel nr. 306010600

The base jack is used to adjust the height of the scaffold. For base jack 60cm height adjustability is 40 – 450 mm.

Artikel nr. 301270000

The base collar with a single rosette is placed on the base jack and forms an easy base for the rest of the scaffold. The base collar makes the alignment of a modular structure easier.

Augstas kvalitātes, mazporainām betona virsmām un eksponētā betona risinājumiem.

Artikel nr. 496

Formolja särskilt för sugande formytor.

Artikel nr. 521

Truss ledgers have the same function as the normal ledgers: They are used as horizontals to connect standards, to transfer loads from platforms into standards and for making side protection of the scaffold. But due to reinforced design, they are able to transfer higher loads than normal ledgers. Double ledgers are available in lengths 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Artikel nr. 527

The bracket is used to create an extended platform outside the scaffold and to add a "cantilever" to the construction. Brackets are available in lengths 0.39m, 0.73m and 1.09m.

Artikel nr. 543

Ledgers are used as horizontals to connect standards and to transfer loads from platforms into standards. Ledgers are also used for making side protection of the scaffold. Ledgers are available in lengths 0.15m, 0.39m, 0.73m, 1.04m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Artikel nr. 549

Steel planksare used to create a working platform in a scaffold. They are placed directly onto the ledgers and secured with the integrated lift-out guard. Steel planks are available with two widths 0.19m and 0.32m and in lengths 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Artikel nr. 559

Steel toe boards are mounted on working platforms to prevent material from falling down. These Toeboards are galvanized and not yellow.

Artikel nr. 561

Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Artikel nr. 574

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Artikel nr. 844