Art.-No. 759040305

Art.-No. 759040306

Art.-No. 759060055

Art.-No. 589280500

Förslutning av staghylsor som inte behövs i Framax Xlife plus ramluckan.

One package contains 500 pieces.

Stämp av stål med teleskopisk anordning.

Leicht, langlebig, stark und ergonomisch – Durch den Einsatz von hochfestem Stahl und modernster Produktion wiegt die Deckenstütze Eurex LW deutlich weniger als gängige Stahlrohrstützen. Und das bei gewohnter Performance sowie Lebensdauer. 

Art.-No. 161

Stödplatta för koppling.

Art.-No. 201

Svetsmutter för hållfast anslutning av spännstag.

Art.-No. 204

Art.-No. 306010600

Die Gewindefussplatte wird zur Höhenverstellung des Gerüstes verwendet. Bei der Gewindefussplatte 60cm beträgt die Höhenverstellbarkeit 40 - 450 mm.

Art.-No. 301013000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Art.-No. 301012000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Art.-No. 301010500

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Art.-No. 301270000

The base collar with a single rosette is placed on the base jack and forms an easy base for the rest of the scaffold. The base collar makes the alignment of a modular structure easier.

Art.-No. 759060250

Das Trennmittel speziell für glatte Schalhaut

Art.-No. 496

Das universelle Trennmittel für saugende Schalungsoberflächen

Art.-No. 521

Truss ledgers have the same function as the normal ledgers: They are used as horizontals to connect standards, to transfer loads from platforms into standards and for making side protection of the scaffold. But due to reinforced design, they are able to transfer higher loads than normal ledgers. Double ledgers are available in lengths 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 527

The bracket is used to create an extended platform outside the scaffold and to add a "cantilever" to the construction. Brackets are available in lengths 0.39m, 0.73m and 1.09m.

Art.-No. 543

Ledgers are used as horizontals to connect standards and to transfer loads from platforms into standards. Ledgers are also used for making side protection of the scaffold. Ledgers are available in lengths 0.15m, 0.39m, 0.73m, 1.04m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 549

Steel planksare used to create a working platform in a scaffold. They are placed directly onto the ledgers and secured with the integrated lift-out guard. Steel planks are available with two widths 0.19m and 0.32m and in lengths 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 559

Steel toe boards are mounted on working platforms to prevent material from falling down. These Toeboards are galvanized and not yellow.

Art.-No. 561