Cost-effective film-faced plywood when price and availability are the deciding factors. Particularly suitable for foundations and wall/slab formwork where high reuse or demanding surface quality are not the main requirements. Whether 12 mm or 18 mm is the right thickness depends on the formwork design and support spacing.

UNIplex Basic is a film-coated plywood sheet made from Vietnamese acacia hardwood. It is a cost-effective choice when price and availability are the deciding factors. It is well suited to applications where surface quality and a high number of reuses are not the primary requirements, such as foundations.

Product information
• 7-ply Vietnamese acacia plywood
• 160 g/m² phenolic-resin film on both sides
• Suitable for exterior use
• FSC-certified raw material
• Up to 8 uses*

💡 When to choose this product:
Choose UNIplex when you need a practical, cost-effective plywood solution and price and availability matter more than a high number of reuses or demanding surface-quality requirements.

Thickness selection: the right thickness depends on the formwork structure and support spacing. The choice between 12 and 18 mm is driven by the structure and panel-deflection requirements.

🏷️ Volume discount: Order at least 6 full packs to benefit from a lower price per m².

*Up to 8 uses is an indicative value under optimum conditions and with correct handling.

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Cost-efficient, easy-to-handle 3-ply sheet for standard formwork

3S Basic is a 3-ply solid-wood sheet made of spruce for standard formwork applications and everyday use on construction sites. It can also be used as form-ply with Dokaflex floor formwork. Both sides have a urea-melamine resin coating. The tight, low-absorbency surface provides uniform concrete surfaces with a slight wood texture.

Product information
• Dimensions: 200 × 50 cm or 250 × 50 cm
• Thickness: 21 mm
• 3-ply solid spruce
• Weight: 9.7 kg/m²
• Approx. 130 g/m² urea-melamine resin coating per side
• Suitable for standard formwork applications
• FSC-certified raw material
• Up to 10 uses*
• Package size: 100 m² (200 × 50 cm: 100 pcs. / 250 × 50 cm: 80 pcs.)

💡 When to choose 3S Basic:
Choose 3S Basic when you need a practical, lightweight and narrow sheet for standard formwork applications or Dokaflex floor formwork. Its 50 cm width and relatively low weight make it easy to handle on site, including where working space is limited.

Choose 200 × 50 cm when a smaller size and easy handling are important, or 250 × 50 cm when greater coverage is more practical.

*The number of uses is indicative. Actual reuse depends on the application, site conditions and handling.