Dimensionally stable solid-web beam with three-ply web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.-No. 002

Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.-No. 003

Timber formwork beam H20 eco N is a solid-web beam in accordance with EN 13377 with proven end reinforcement in the form of bevelled beam ends and extra plastic rivet in the beam flange.

Art.-No. 004

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Art.-No. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 008

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 009

High-grade plywood sheet made of Nordic birch with 120 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-No. 015

High-grade plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-No. 016

High-grade plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-No. 017

Telescopic steel prop.

Art.-No. 027

Self-cleaning threadbar

Art.-No. 029

Self-cleaning threadbar

Art.-No. 030

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Art.-No. 036

Forming right-angled outside corners, stop-ends and column formwork.

Art.-No. 037

Forming right-angled inside corners.

Art.-No. 038

Forming right-angled outside corners.

Art.-No. 040

Bracing gangforms, infills and corners and forming stop-ends.

Art.-No. 041

Steel tube with wall thickness of 3.2 mm.

Art.-No. 042

Grating for safety barriers on the formwork or on the structure.

Art.-No. 043

Forming acute-angle and obtuse-angle inside corners.

Art.-No. 048