Dimensionally stable solid-web beam with three-ply web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.-nr. 002

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Art.-nr. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-nr. 006

High-grade plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-nr. 017

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Anzahl Lagen: 15

Art.-nr. 022

The Doka Floor prop Eurex 30 top has an integrated impact protector (except for length 550) for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 30 kN at any extension length and corresponds to prop class C/E according to EN 1065.

Art.-nr. 025

Self-cleaning threadbar

Art.-nr. 029

Self-cleaning threadbar

Art.-nr. 030

Self-cleaning threadbar

Art.-nr. 032

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Art.-nr. 035

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Art.-nr. 036

Forming right-angled outside corners, stop-ends and column formwork.

Art.-nr. 037

Forming right-angled inside corners.

Art.-nr. 038

Forming right-angled inside corners.

Art.-nr. 039

Forming right-angled outside corners.

Art.-nr. 040

Bracing gangforms, infills and corners and forming stop-ends.

Art.-nr. 041

Grating for safety barriers on the formwork or on the structure.

Art.-nr. 043

Closure between the panels.

Art.-nr. 044

Closure between the panels for formwork-sheet thickness 21 mm.

Art.-nr. 045

Tapered form tie, operated from one side only, for Framed formwork Framax Xlife plus.

Art.-nr. 046