Art.-nr. 580074000

High-tensile and aligning inter-panel connection. Inter-panel joins can be pulled tight.

Art.-nr. 580078000

Connecting plate for making inside corners.

Art.-nr. 580080000

Drilling template for panel assembly with beam screws between Doka beams and walings. Used together with the Guide rail .....m.

Art.-nr. 580081000

For securing Doka formwork beams to closure plates.

Art.-nr. 580082000

Formwork-sheet stop for panel assembly of the timber-beam formwork.

Art.-nr. 580110000

For securing the Doka beams at the ends of the waling.

Art.-nr. 580114000

For securing Doka beams anywhere on the waling. Also suitable for post-assembly securing.

Art.-nr. 580120000

For securing Doka beams anywhere on the waling or steel profile, for example the I-beam.

Art.-nr. 580135000

For securing Doka beams H20 anywhere on the multi-purpose waling.

Art.-nr. 580137000

For securing Doka beams or squared timbers anywhere on the waling or steel profile, for example the IPB. Also suitable for post-assembly securing.

Art.-nr. 580217000

Hose connection of the Large-area formwork Top 50 or Wall formwork FF20 for self-compacting concrete (SCC).

Art.-nr. 580218000

For vertical plumbing of beam formwork panels set longside vertical.

Art.-nr. 580262000

Inside corner plate, for example for shaft formwork. Enables the entire shaft inside corner to be struck and repositioned in one piece.

Art.-nr. 580267000

For making rigid corner plates at any angle. After the formwork has been plumbed, two Half splice plates are welded at the predefined angle.

Art.-nr. 580310000

Bolt-up longitudinal connector for Doka beams. Used for vertical stacking.

Art.-nr. 580381000

Nailed connection for intersecting Doka beams or squared timbers.

Art.-nr. 580390000

Toolbox with selected, typical hand tools needed especially for working on timber-beam formwork.

Art.-nr. 580460000

For raising, repositioning and laying down timber-beam formwork.

Art.-nr. 580476000

Bracket for making a working platform for drop-in engagement on the formwork.

Art.-nr. 580488000

End-guard for platforms of between 1.20 m and 1.80 m wide.