Tube en acier de 3,2 mm d’épaisseur de paroi.

Art.-No. 042

Art.-No. 582560000

Assemblage de deux tubes d’échafaudage 48,3mm dans un angle quelconque.

Art.-No. 582680000

Réalisation des ancrages de la tour escalier sur le bâtiment.

Art.-No. 682004000

Assemblage de deux tubes d’échafaudage 48,3mm dans un angle de 90°.

Art.-No. 328460600

The U head is designed to be installed at the top of a scaffold. Particularly for Shoring applications where beams are required to be supported. Alternatively the U head can be used at the base of the scaffold by turning it upside down.

Art.-No. 328450600

The 4 way screw jack is designed to be installed at the top of a scaffold. Particularly for shoring applications where one more beams are required to be supported.

Art.-No. 319022575

The Alum ladder hatch deck 257cm acts as a lightweight, extra wide scaffold acess deck which incorporates a Ladder. It is available only with 2.57m.

Art.-No. 316053075

The inner guardrail extended is used to shield the inner side of a staircase tower at the exit providing a guardrail at landing bay. Available for stair lengths of 2.57m and 3.07m.

Art.-No. 316052575

The inner guardrail extended is used to shield the inner side of a staircase tower at the exit providing a guardrail at landing bay. Available for stair lengths of 2.57m and 3.07m.

Art.-No. 316013075

The stairs are used to provide access to the various deck levels within the scaffold. The aluminum platform stairs are suitable for 2.00 kN/m² (EN12811: class 3). Alu-stairways are available in lengths of 2.57m, 3.07m.

Art.-No. 315082075

The Stair stringer is the diagonal member of the 10 Leg Stair System. The Stringer must be used in pairs in order of supporting the stair treads. The Stringer is used for a typical 2.0m lift height.

Art.-No. 315072075

La poutrelle d'escalier est l'élément diagonal du système d'escalier à 10 marches. La poutrelle primaire doit être utilisée par paires, dans l'ordre de support des marches. La poutrelle primaire est utilisée pour une hauteur de levage standard de 2,0 m.

Art.-No. 315020890

La marche d'escalier est conçue comme l'élément horizontal reliant les poutrelles d’assemblage, formant ainsi les marches du système d'escalier. Celles-ci sont adaptées à la largeur de travée de 1,036 m (1,04 m).

Art.-No. 306030780

The Swivel base jack is used as a starting base for a scaffold. It is adjustable in height and angle to allow for compensation on uneven surfaces so that a level scaffold is always attainable.

Art.-No. 306010600

The base jack is used to adjust the height of the scaffold. For base jack 60cm height adjustability is 40 – 450 mm.

Art.-No. 399020000

Le support de rangement pour échafaudages est conçu pour le stockage d'articles volumineux tels que des montants, des moises de tube, des planchons acier, etc.

Art.-No. 308410735

The Angular deck is used for circular scaffold applications to close the gap between trapezoidal scaffold bays in order to reduce the need for lapping Wood Planks. Up to 45-degrees of adjustment can be made between bays. It is available at widths of 73cm (2 steel plank wide) and an extension to 1.09m (3 steel plank) wide scaffold.

Art.-No. 308411093

The Angular deck is used for circular scaffold applications to close the gap between trapezoidal scaffold bays in order to reduce the need for lapping Wood Planks. Up to 45-degrees of adjustment can be made between bays. It is available at widths of 73cm (2 steel plank wide) and an extension to 1.09m (3 steel plank) wide scaffold.

Art.-No. 301270000

L’embase est placée sur la broche de pied avec un seul disque perforé et constitue une base simple pour le reste de l'échafaudage. La pièce de départ facilite l'alignement.

Art.-No. 301280000

The Leg lock, used in pairs, is designed to attach to the bottom rosette of the top Standard and to the top rosette of the bottom Standard. This joins the standards together in preparation for suspended or lifted scaffold applications.