Item no. 589338000

Concrete cone for complete closure of the form-tie point.

Item no. 589148000

The DokaXlight adapter XP is used in combination with Protective gratings XP or guardrail boards for constructing safety railings on the opposing formwork with a tilt of 15°.

Item no. 589164000

Can be pushed over the end face of the panel (no nails needed). With column formwork and for forming outside corners, it is used with the universal panel (integrated slot grid for universal fixing bolts).

Item no. 589167000

Bracket for making a working platform for drop-in engagement on the formwork.

Item no. 586646000

Storage and transport device for Protective barriers Z.

Installing form-tie components at an angle of 45 °.

Item no. 459

Securing System ladder XS to column formwork.

Item no. 460

The sensor is for taking measurements on horizontal concrete components (bottom slab, floor slab, etc.).

Item no. 479

Measuring cable with three measuring points. The cable connects to the Concremote cable sensor and is cast into the concrete as a lost part.

Item no. 480

The cable sensor can be deployed for various applications depending on customer requirements. Concremote wall sensing unit or Concremote cable can be connected.

Item no. 481

The calibration box cube is for calibrating the type of concrete used and consists of 3 cube moulds 15x15x15 mm.

Item no. 482

Prevents adhesion between concrete and cone with insulation up to 11 cm thick.

Item no. 486

Das Trennmittel speziell für glatte Schalhaut

Item no. 496

Framed element made of aluminium with Xlife sheet for craneless forming of right-angle outside corners, stop-ends and column formwork.

Item no. 512

Corner element made of aluminium with Xlife sheet for craneless forming of right-angle inside corners.

Item no. 524

Plywood sheet made of Chinese eucalyptus with 240 g/m² phenolic-resin film coating on both sides. The phenolic resin bond of the sheet passes a 72-hour boiling test. The edges are sealed with acrylic-resin varnish.

Item no. 533

The box-out block for more safety on construction sites.

Item no. 550

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating and extra varnish sealant coating sanded with corundum particles on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Item no. 554

Item no. 576

Item no. 578