Der Holzschalungsträger H20 top ist ein Vollwandträger gemäß EN 13377 mit innovativer Endverstärkung aus Polyurethan für erhöhte Widerstandsfähigkeit gegen mechanische Beanspruchungen.

Št. art. 002

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Št. art. 004

The Doka formwork sheet 3-SO is a high-grade three-ply solid-wood sheet with urea-melamine resin coating on both sides for horizontal and vertical formwork applications.

Št. art. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Št. art. 007

Cenovno ugodna trislojna plošča za vsa standardna področja uporabe.

Opažna plošča 3S basic je trislojna masivna lesena plošča z obojestranskim premazom iz sečninske/melaminske smole, primerna za večkratno uporabo za različne uporabe na gradbišču. Zaradi visoke dimenzijske stabilnosti in natančno oblikovanih kotov nastane manj stroškov naknadne obdelave.

Št. art. 008

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Št. art. 009

High-grade plywood sheet made of Nordic birch with polypropylene coating on both sides, on the concrete facing side with glass-fibre reinforcing. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 2-component edge protection varnish.

Št. art. 018

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Št. art. 019

Izjemno trpežen teleskopski kovinski podpornik z zaščito pred udarci.

Robusten podpornik Eurex 20 top z dolgo življenjsko dobo prepriča z zagotovljeno nosilnostjo 20 kN ter se uporablja kot navpični podporniki pri začasnih konstrukcijah. Integrirano udarno varovalo zanesljivo ščiti zunanjo cev pred mehanskimi poškodbami in bistveno podaljša življenjsko dobo jeklenega podpornika.

Št. art. 024

EN 1065-compliant telescopic construction prop, made of steel.

Št. art. 025

Teleskopski kovinski podpornik z visoko nosilnostjo za varno uporabo.

Visokokakovostni teleskopski podpornik Eurex 20 eco odlikuje visoka minimalna nosilnost 20 kN. Ustreza razredu podpornikov B/D v skladu s standardom EN 1065. Jeklen podpornik navdušuje tudi z enostavnim in varnim rokovanjem ter odličnim razmerjem med ceno in zmogljivostjo.

Št. art. 026

Floor prop for heavy slab loads.

Št. art. 028

Self-cleaning threadbar

Št. art. 029

Self-cleaning threadbar

Št. art. 030

Expendable form-tie distance tube for retrievable form ties at waterproof form-tie points.

Št. art. 031

Self-cleaning threadbar

Št. art. 032

Self-cleaning threadbar

Št. art. 033

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Št. art. 035

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Št. art. 036

Forming right-angled outside corners, stop-ends and column formwork.

Št. art. 037