Timber formwork beam H20 top is a solid-web beam in accordance with EN 13377 with innovative polyurethane end reinforcement for increased resistance to mechanical stresses and strains.

Art.-nr. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Art.-nr. 004

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Art.-nr. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Hinweis zu Lieferkosten: Bei der Bestellung von ganzen Lkw-Ladungen erfolgt die Lieferung kostenlos ab Werk.

Art.-nr. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Hinweis zu Lieferkosten: Bei der Bestellung von ganzen Lkw-Ladungen erfolgt die Lieferung kostenlos ab Werk.

Art.-nr. 007

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Hinweis zu Lieferkosten: Bei der Bestellung von ganzen Lkw-Ladungen erfolgt die Lieferung kostenlos ab Werk. 

Art.-nr. 009

3-ply infill sheet made of spruce, crosswise glued, without edge strip. Surface enhanced with urea-melamine resin adhesive.

Art.-nr. 011

High-grade plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-nr. 017

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Anzahl Lagen: 15

Art.-nr. 019

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Anzahl Lagen: 15

Art.-nr. 022

The Doka Floor prop Eurex 20 top has an integrated impact protector for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 20 kN at any extension length and corresponds to prop class D, B/D or C/D according to EN 1065.

Art.-nr. 024

The Doka Floor prop Eurex 30 top has an integrated impact protector (except for length 550) for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 30 kN at any extension length and corresponds to prop class C/E according to EN 1065.

Art.-nr. 025

The Doka floor prop Eurex 20 eco offers consistently high load capacity of at least 20 kN at any extension length and combines this with particularly easy and safe handling. As a steel floor prop of class B/D according to EN 1065, it is versatile and flexible for all common applications.

Art.-nr. 026

Self-cleaning threadbar

Art.-nr. 029

Self-cleaning threadbar

Art.-nr. 030

Self-cleaning threadbar

Art.-nr. 032

Self-cleaning threadbar

Art.-nr. 033

Expendable form-tie distance tube for retrievable form ties in fair-faced concrete.

Art.-nr. 034

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Art.-nr. 035

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Art.-nr. 036