Timber formwork beam H20 top is a solid-web beam in accordance with EN 13377 with innovative polyurethane end reinforcement for increased resistance to mechanical stresses and strains.

Art.-No. 003

Timber formwork beam H20 top is a solid-web beam in accordance with EN 13377 with innovative polyurethane end reinforcement for increased resistance to mechanical stresses and strains.

Art.-No. 002

Timber formwork beam H20 eco N is a solid-web beam in accordance with EN 13377 with proven end reinforcement in the form of bevelled beam ends and extra plastic rivet in the beam flange.

Art.-No. 004

Timber formwork beam H20 eco P is a sold-web beam in accordance with EN 13377 with proven end reinforcement in the form of bevelled beam ends and extra plastic rivet in the beam flange.

Art.-No. 005

The Doka formwork sheet 3-SO is a high-grade three-ply solid-wood sheet with urea-melamine resin coating on both sides for horizontal and vertical formwork applications.

Art.-No. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 007

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

The article is not available at this moment and its value may vary.

Art.-No. 008

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Art.-No. 022

EN 1065-compliant telescopic construction prop, made of steel.

Art.-No. 024

EN 1065-compliant telescopic construction prop, made of steel.

Art.-No. 025

EN 1065-compliant telescopic construction prop, made of steel.

Art.-No. 026

Self-cleaning threadbar

Art.-No. 029

Self-cleaning threadbar

Art.-No. 030

Grating for safety barriers on the formwork or on the structure.

Art.-No. 043

Bracing gangforms, infills and corners and forming stop-ends.

Art.-No. 075

Bracing load-bearing tower frames.

Art.-No. 076

Infilling along edges and around columns.

Art.-No. 079

For forming large floor areas.

Art.-No. 082

Grille made up of primary and secondary beams with swivel heads, for sheeting with any formwork sheeting.

Art.-No. 083

Post for safety barriers on the formwork or on the structure.

Art.-No. 089