The tried-and-tested formwork beam in solid-web design.

High-quality, hard-wearing, durable – The Doka beam H20 eco P is a dimensionally stable solid wall beam with a web made of special flat-pressed sheet and proven end-reinforcement by bevelling the beam ends and an extra plastic rivet in the beam chord. The beam can be used in wall and slab formwork systems.

Art.-No. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 008

EN 1065-compliant telescopic construction prop, made of steel.

Art.-No. 024

Self-cleaning threadbar

Art.-No. 029

Self-cleaning threadbar

Art.-No. 030

Grating for safety barriers on the formwork or on the structure.

Art.-No. 043

Bracing gangforms, infills and corners and forming stop-ends.

Art.-No. 075

Infilling along edges and around columns.

Art.-No. 079

Post for safety barriers on the formwork or on the structure.

Art.-No. 089

Art.-No. 580470000

Erecting safety railings at exposed outer edges.

Art.-No. 581961000

Connector in use with anchor plates and tie rods.

Art.-No. 581964000

Connector in use with anchor plates and tie rods.

Art.-No. 581966000

Connector with captive support plate used with tie rods.

Art.-No. 584386000

Pushed into the fresh concrete, screw-in socket for the Handrail post 1.10m.

Art.-No. 586148000

Supporting side formwork of drop beams and slab stop-ends.

Art.-No. 586149000

In combination with Beam forming support 20, adapting to the height of drop beams and slab stop-ends.

Art.-No. 586170000

Floor-prop head for supporting and stabilising Doka formwork beams.

Art.-No. 586174000

Floor-prop head for supporting and stabilising Doka formwork beams, with integral quick-lowering feature.

Art.-No. 586179000

Securing intermediate props to prevent toppling.

Art.-No. 588151000

Bracing right-angled inside corners.