Telescopic steel prop.

N.º art. 027

The tried-and-tested formwork beam in solid-web design.

High-quality, hard-wearing, durable – The Doka beam H20 eco P is a dimensionally stable solid wall beam with a web made of special flat-pressed sheet and proven end-reinforcement by bevelling the beam ends and an extra plastic rivet in the beam chord. The beam can be used in wall and slab formwork systems.

N.º art. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

N.º art. 008

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Aviso: Para envío rápido, actualmente solo disponibles en las medidas 200/50cm 250/50cm y 197/50cm

N.º art. 009

High-grade plywood sheet made of Nordic birch with 120 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

N.º art. 015

High-grade plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

N.º art. 016

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

N.º art. 019

N.º art. 024

N.º art. 026

Self-cleaning threadbar

Aviso: Para envío rápido, actualmente solo disponibles en las medidas 1,25m

N.º art. 029

Self-cleaning threadbar

N.º art. 030

Expendable form-tie distance tube for retrievable form ties at waterproof form-tie points.

N.º art. 031

Self-cleaning threadbar

N.º art. 032

Bracing gangforms, infills and corners and forming stop-ends.

N.º art. 041

Grating for safety barriers on the formwork or on the structure.

N.º art. 043

Bracing gangforms, infills and corners and forming stop-ends.

N.º art. 075

Infilling along edges and around columns.

N.º art. 079

Post for safety barriers on the formwork or on the structure.

N.º art. 089

For load transfer, keeps the Doka formwork beams in position and gives the formwork panel stability and rigidity.

N.º art. 095

N.º art. 583012000

Storage and transport device for small items