Art.-No. 153

Diagonal anchor for anchoring the Supporting construction frame "Variable".

Art.-No. 199

Weld-on socket for force-transmitting connection between tie rods.

Art.-No. 204

Prevents concrete from escaping at the form-tie point.

Art.-No. 212

Seals the formwork on the concrete side and prevents the concrete from bleeding.

Art.-No. 213

Storage and transport device for Dokadek panels.

Art.-No. 223

Holding Dokadek panels in the building edge zone.

Art.-No. 224

For supporting and aligning wall formwork.

Art.-No. 239

Panel connection in the outside corner and with column formwork and for attaching universal walings, for example, and other parts to the formwork.

Art.-No. 261

Triangular ledge with soft plastic lips for close fit to the surface of the panel. Used for making no-nails outside corners and column formwork with universal panels.

Art.-No. 278

For securing plates and accessory parts, for example to multi-purpose walings.

Art.-No. 344

Prevents adhesion between concrete and cone with insulation up to 11 cm thick.

Art.-No. 486

Release agent specially for smooth formwork surfaces.

Art.-No. 496

Release agent specially for absorbent formwork surfaces.

Art.-No. 521

Art.-No. 581

Art.-No. 583

Art.-No. 587

Art.-No. 588

Art.-No. 185311000

Plywood sheet made of a combination of Vietnamese hardwoods (Acacia & Eucalyptus A/A Grade) with film coating on both sides. Both sides are coated with 120 g/m² Dark Brown phenolic-resin film. Bonding as per EN 314-2 is suitable for exterior use.

• New

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 008