Steel tube with wall thickness of 3.2 mm.

Art.-No. 042

Art.-No. 582560000

For connecting two Scaffold tubes 48.3mm at any angle.

Art.-No. 586456000

Making safety barriers on the structure or on the formwork.

Art.-No. 584384000

Fall protection on the structure.

Art.-No. 584385000

Pushed into the fresh concrete, push-in socket for the Handrail post 1.10m.

Package size: 100 pcs.

Art.-No. 580589000

Art.-No. 580579000

Releasing the positioning cones.

Art.-No. 581120000

Lost form-tie component for single-sided formwork tying.

Art.-No. 581448000

Tightening and loosening cone screws.

Art.-No. 581692000

Securing cantilever positioning cones when it is not possible to drill through the formwork sheeting.

Art.-No. 581890000

Expendable form-tie component for single-sided tying.

Art.-No. 581891000

Closing the opening left in the concrete by the bridge edge beam support.

Package size: 100 pcs.

Art.-No. 581896000

Expendable form-tie component for single-sided tying.

Art.-No. 581966000

Connector with captive support plate used with tie rods.

Art.-No. 581984000

Expendable form-tie component for single-sided tying.

Art.-No. 580428000

Making post-casting suspension points for Folding platforms A and K with rock anchor spreader unit.

Art.-No. 580495000

Suspending Folding platforms A, B and K with insulation up to 11 cm thick.

Art.-No. 581123000

Retrievable tube for installation of the rock anchor spreader unit.

Art.-No. 581699000

Positioning cone for suspension cone with larger bearing surface.

Art.-No. 581889000

Closing the opening left in the concrete by the bridge edge beam support, with corrosion protection.

Package size: 100 pcs.