Timber-and-plastic composite formwork beam with Top beam-end reinforcement and plastic sheet on the broadside of the flange. (Approval n° Z-9.1-773)

Art.-nr. 001

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-nr. 006

Bracing gangforms, infills and corners and forming stop-ends.

Art.-nr. 075

Infilling along edges and around columns.

Art.-nr. 079

Floor formwork panel for Dokadek 30 with drop head.

Art.-nr. 080

For forming large floor areas.

Art.-nr. 081

Making assembly platforms.

Art.-nr. 090

Making assembly platforms with integral manhole.

Art.-nr. 091

Basic frame with integral ladder and captive connectors for vertical stacking.

Art.-nr. 105

Load-bearing tower with integral climbing aid.

Art.-nr. 107

Art.-nr. 580470000

Erecting safety railings at exposed outer edges.

Art.-nr. 581961000

Connector in use with anchor plates and tie rods.

Art.-nr. 581964000

Connector in use with anchor plates and tie rods.

Art.-nr. 584384000

Fall protection on the structure.

Art.-nr. 584385000

Pushed into the fresh concrete, push-in socket for the Handrail post 1.10m.

Packungsgröße: 100 Stk.

Art.-nr. 584386000

Pushed into the fresh concrete, screw-in socket for the Handrail post 1.10m.

Packungsgröße: 100 Stk.

Art.-nr. 586148000

Supporting side formwork of drop beams and slab stop-ends.

Art.-nr. 586149000

In combination with Beam forming support 20, adapting to the height of drop beams and slab stop-ends.

Art.-nr. 586170000

Floor-prop head for supporting and stabilising Doka formwork beams.

Art.-nr. 586174000

Floor-prop head for supporting and stabilising Doka formwork beams, with integral quick-lowering feature.