Timber-and-plastic composite formwork beam with Top beam-end reinforcement and plastic sheet on the broadside of the flange. (Approval n° Z-9.1-773)

Art.nr. 001

Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.nr. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Art.nr. 004

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Art.nr. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.nr. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.nr. 008

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Art.nr. 019

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Art.nr. 022

The Doka Floor prop Eurex 20 top has an integrated impact protector for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 20 kN at any extension length and corresponds to prop class D, B/D or C/D according to EN 1065.

Art.nr. 024

Doka-Deckenstützen Eurex top sind Baustützen aus Stahl mit Ausziehvorrichtung, entsprechend EN 1065.
Sie dienen als vertikale Stützen für temporäre Konstruktionen.

Art.nr. 025

The floor prop with high load capacity and safe handling

The tested quality prop Eurex 20 eco from Doka is characterised by a high minimum load capacity of 20 kN and corresponds to prop class B/D in accordance with standard EN 1065. The steel props also impress with their simple and safe handling and their impressive price-performance ratio.

Art.nr. 026

The lightweight aluminium floor prop with high load capacity

The floor prop Eurex 100 plus is a high-strength construction prop made of aluminium with a load capacity up to 128 kN, type-tested and approved in accordance to with approval Z-8.312-868. The floor prop also impresses with its easy handling thanks to quick-motion adjustment screw jack.

Art.nr. 028

Self-cleaning threadbar

Art.nr. 029

Self-cleaning threadbar

Art.nr. 030

Self-cleaning threadbar

Art.nr. 032

Self-cleaning threadbar

Art.nr. 033

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Art.nr. 035

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Art.nr. 036

Forming right-angled outside corners, stop-ends and column formwork.

Art.nr. 037

Forming right-angled inside corners.

Art.nr. 038