Timber-and-plastic composite formwork beam with Top beam-end reinforcement and plastic sheet on the broadside of the flange. (Approval n° Z-9.1-773)

Art.-nr. 001

Dimensionally stable solid-web beam with three-ply web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.-nr. 002

Timber formwork beam H20 top is a solid-web beam in accordance with EN 13377 with innovative polyurethane end reinforcement for increased resistance to mechanical stresses and strains.

Art.-nr. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Timber formwork beam H20 eco N is a solid-web beam in accordance with EN 13377 with proven end reinforcement in the form of bevelled beam ends and extra plastic rivet in the beam flange.

Art.-nr. 004

Timber formwork beam H20 eco P is a sold-web beam in accordance with EN 13377 with proven end reinforcement in the form of bevelled beam ends and extra plastic rivet in the beam flange.

Art.-nr. 005

The Formwork sheet 3S basic is a three-ply solid-wood sheet with urea-melamine resin coating on both sides for many different uses on construction sites.

Art.-nr. 008

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Art.-nr. 019

Březová překližka s oboustranným fenolickým filmem 220 g/m² pro horizontální a vertikální bednění.

Použití pro aplikace s vysokými nároky na povrch betonu a životnost.

Art.-nr. 022

EN 1065-compliant telescopic construction prop, made of steel.

Art.-nr. 024

EN 1065-compliant telescopic construction prop, made of steel.

Art.-nr. 025

EN 1065-compliant telescopic construction prop, made of steel.

Z HIND- 39,55  € z

Z Kohaletoimetamine kuni 1 kuu     z

Art.-nr. 026

Floor prop for heavy slab loads.

Art.-nr. 028

Self-cleaning threadbar

Art.-nr. 029

Self-cleaning threadbar

Art.-nr. 030

Self-cleaning threadbar

Art.-nr. 032

Self-cleaning threadbar

Art.-nr. 033

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Art.-nr. 035

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Art.-nr. 036

Forming right-angled outside corners, stop-ends and column formwork.

Art.-nr. 037

Forming right-angled inside corners.

Art.-nr. 038