Förlorad stagdel för ensidig förankring.

Art.-No. 116

Art.-No. 589223000

Är till för vattentät och eldbeständig förslutning av förankringsställena i betongen.

Art.-No. 588651000

Teleskopiskt verktyg för att manövrera Framax kranbygel från marken.

Art.-No. 589288000

Är till för att försluta förankringsställena i betongen.

Art.-No. 589280500

Förslutning av staghylsor som inte behövs i Framax Xlife plus ramluckan.

Stödplatta för koppling.

Art.-No. 201

Formolja särskilt för släta formytor.

Art.-No. 496

Formolja särskilt för sugande formytor.

Art.-No. 521

Truss ledgers have the same function as the normal ledgers: They are used as horizontals to connect standards, to transfer loads from platforms into standards and for making side protection of the scaffold. But due to reinforced design, they are able to transfer higher loads than normal ledgers. Double ledgers are available in lengths 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 527

The bracket is used to create an extended platform outside the scaffold and to add a "cantilever" to the construction. Brackets are available in lengths 0.39m, 0.73m and 1.09m.

Art.-No. 543

Steel toe boards are mounted on working platforms to prevent material from falling down. These Toeboards are galvanized and not yellow.

Art.-No. 561

Grating for safety barriers on the formwork or on the structure.

Art.-No. 043

Post for safety barriers on the formwork or on the structure.

Art.-No. 089

Art.-No. 586456000

Making safety barriers on the structure or on the formwork.

Art.-No. 586457000

Securing the Handrail post XP to concrete slabs.

Attaching a toeboard to the Handrail post XP 1.20m.

Art.-No. 279

Art.-No. 306010600

The base jack is used to adjust the height of the scaffold. For base jack 60cm height adjustability is 40 – 450 mm.

Art.-No. 301013000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Art.-No. 301012000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Art.-No. 301010500

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.